www.pieweb.com

Industry Associations/Institutions

PLASTICS WASTE
MEPs adopt report on new waste shipment regulation / European trade group calls for further amendments
09.12.2022
PLASTICS INDUSTRY USA
Congress introduces Protecting Communities from Plastics Act / Opposition and counter proposal from trade associations
08.12.2022
CIRCULAR ECONOMY
New EU requirements for recycled plastics with food contact
08.12.2022
PACKAGING
Proposed EU quotas on reusable plastics are incomprehensible, says Germany's IK / Reusable quotas for beverages not ambitious enough, says NGO
07.12.2022
ELECTRONIC WASTE RECYCLING
WEEE shipment rules: European trade bodies seek simplification in Basel Convention amendments
06.12.2022
PACKAGING
EU draft law sets targets for reuse, recycling / Goal is to cut packaging waste / Chemical recycling to count towards reclaim quotas / Trade groups raise concerns
05.12.2022
TITANIUM DIOXIDE
EU general court overturns ECHA's classification as a carcinogen / Industry groups welcome decision / Market weakness
29.11.2022
PACKAGING
Trade associations criticise EU packaging waste proposal / Targets said to lack scientific support / Call for guidelines based on ecological impacts
22.11.2022
PLASTICS AND ENVIRONMENT
NGOs raise concerns on EU's revision to waste legislation / Circularity rate of 8.6% “dangerous for Europe's future”
21.11.2022
PLASTICS AND CLIMATE
Net-zero plans not enough to keep global warming at 1.5C / Faster decarbonisation action, focus on cutting consumption priority – ZWE report
18.11.2022
E&E RECYCLING
New protocols on recovery, reuse, ecodesign for E&E components / Multinational C-Servees project
18.11.2022
EDITORIAL
Is Germany's proposed law to fund SUP recovery a long overdue move or a bureaucratic monster?
17.11.2022
PLASTICS AND ENVIRONMENT
EMF says most firms to miss 2025 packaging targets / PCR use generally higher in 2021 / Virgin plastics consumption back to 2018 levels / Global progress report
16.11.2022
PLASTICS PACKAGING
Planned EU directive on packaging and packaging waste: Binding recyclate quotas from 2030, regulations for reusable containers / Isabell Schmidt from Germany‘s IK in an interview with PIE
16.11.2022
ELIPSO
Bouquet named general secretary of French plastics packaging association
16.11.2022
CONSUMER GOODS
BPF highlights 15 products and initiatives that promote recycling and sustainability
15.11.2022
BIOPLASTICS
Study casts doubt over home-compostable plastics packaging / Researchers question “effective or environmentally beneficial” waste processing method
11.11.2022
CIRCULAR ECONOMY
German federal cabinet approves law to set up a single-use plastics fund / Trade associations criticise unnecessary bureaucratic costs
11.11.2022
GERMAN ECONOMY
Business outlook worst on record – survey / Over 20% of plastics and rubber firms expect production cuts / Experts forecast recession in 2023
10.11.2022
PLASTICS AND ENVIRONMENT
UK: Recoup first 'supporter' of BPF's Ocean Clean Sweep scheme / Over 140 members sign up against pellet loss
09.11.2022
GERMAN PACKAGING
Covid-led consumption falls slightly in 2020 / More waste in households, decline in trade and industry
09.11.2022
PET RECYCLING ITALY
Coripet expands plastic bottle reclaim initiative / Italy to approach targets set by SUP directive / 860 reverse-vending machines installed
08.11.2022
UK RECYCLING
Recoup calls for more plastic packaging reclaim capacity / BPF says most such waste exported
07.11.2022
WASTE INCINERATION
Energy from incinerated waste not the answer to EU's gas crisis / ZWE report
07.11.2022
EU FLOOR COVERINGS
Walking on circular flooring solutions: EuFCA survey to gather data on potential market uptake of separated materials by plastics converters
07.11.2022
Seite 1 von 71
Topic search
Plastics Information Europe
  • Polymer Prices (5.250)
    • Petrochemicals (275)
    • Standard Thermoplastics (798)
    • PET (218)
    • Engineering Thermoplastics (222)
    • Recyclate (305)
      • Standard Thermoplastics / Recyclate (152)
      • Engineering Thermoplastics / Recyclate (153)
    • Polyurethanes (215)
    • High Performance Polymers (2)
    • Composites (152)
    • Announcements (2.478)
    • World Regions (491)
      • China (230)
        • Standard Thermoplastics (116)
        • Engineering Thermoplastics (114)
      • North America (137)
      • Russia (124)
    • Spot Prices (94)
  • Companies (29.439)
    • Polymer Materials (14.545)
      • Petrochemicals (2.588)
      • Charge (1.653)
        • General (83)
        • Masterbatches (314)
        • Additives (684)
        • Colours (325)
        • Reinforcements/Fillers (247)
      • Polymers (9.270)
        • General (570)
        • Standard Thermoplastics (3.230)
          • General (107)
          • Polyolefins (1.596)
          • Polystyrenes (289)
          • PVC (585)
          • Polyester (478)
          • Expandable (PS, PP, PE) (175)
        • Technical Thermoplastics (2.804)
          • General (330)
          • Styrene Copolymers (226)
          • PC/PMMA (372)
          • Polyamides (759)
          • POM/PBT/PP (271)
          • Technical Compounds (846)
        • PUR (674)
        • Other (1.992)
          • General (87)
          • Composites/Thermosets (372)
          • High Performance (512)
          • Biopolymers (580)
          • Elastomers/TPE (312)
          • Recyclate (129)
      • Distribution (1.034)
    • Machinery (1.019)
      • General (25)
      • Plant Construction (120)
      • Core Machines (702)
        • General (82)
        • Extrusion (172)
        • Injection Moulding (347)
        • Blow Moulding (69)
        • Foam (12)
        • PUR (16)
        • Compression Moulding (4)
      • Peripherals (168)
        • General (30)
        • Control Systems (4)
        • Automatisation (30)
        • Dies/Tools/Moulds (91)
        • Components (13)
      • Finishing (4)
    • Processing (6.293)
      • General (777)
      • Extrusion (2.075)
        • General (104)
        • Flexible Films (984)
        • Rigid Films/Sheet (345)
        • Pipes (308)
        • Profiles/Rods (244)
        • Other (90)
      • Injection Moulding (1.497)
      • Blow Moulding (459)
      • PUR (252)
      • Other (1.013)
        • General (107)
        • Foam (285)
        • Composites/Thermosets (316)
        • Thermoforming (188)
        • Rotational Moulding (29)
        • Additive Manufacturing (88)
      • Finishing (220)
    • Application (6.222)
      • General (114)
      • Packaging (2.631)
      • Construction (626)
      • Automotive / Transport (1.458)
      • Electrical Appliances (307)
      • Consumer Goods (563)
      • Medical (350)
      • Technical (173)
    • Other (1.360)
      • Recycling/Disposal (1.132)
      • Services (218)
      • Logistics (10)
  • Commercial Register (87)
    • Insolvency (82)
    • Changes (5)
  • Markets (19.273)
    • Polymer Materials (8.412)
      • Petrochemicals (1.999)
      • Charge (769)
        • General (38)
        • Masterbatches (84)
        • Additives (308)
        • Colours (132)
        • Reinforcements/Fillers (207)
      • Polymers (5.331)
        • General (524)
        • Standard Thermoplastics (2.105)
          • General (67)
          • Polyolefins (1.037)
          • Polystyrenes (135)
          • PVC (448)
          • Polyester (294)
          • Expandable (PS, PP, PE) (124)
        • Technical Thermoplastics (1.132)
          • General (85)
          • Styrene Copolymers (93)
          • PC/PMMA (133)
          • Polyamides (385)
          • POM/PBT/PP (96)
          • Technical Compounds (340)
        • PUR (404)
        • Other (1.166)
          • General (37)
          • Composites/Thermosets (273)
          • High Performance (266)
          • Biopolymers (362)
          • Elastomers/TPE (125)
          • Recyclate (103)
      • Other Materials (46)
      • Distribution (267)
    • Machinery (476)
      • General (122)
      • Plant Construction (13)
      • Core Machines (272)
        • General (101)
        • Extrusion (34)
        • Injection Moulding (116)
        • Blow Moulding (14)
        • PUR (5)
        • Compression Moulding (2)
      • Peripherals (69)
        • General (21)
        • Automatisation (15)
        • Dies/Tools/Moulds (33)
    • Processing (1.546)
      • General (352)
      • Extrusion (575)
        • General (20)
        • Flexible Films (275)
        • Rigid Films/Sheets (113)
        • Pipes (70)
        • Profiles/Rods (87)
        • Other (10)
      • Injection Moulding (174)
      • Blow Moulding (43)
      • PUR (71)
      • Other (287)
        • General (19)
        • Foam (75)
        • Composites/Thermosets (133)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (32)
      • Finishing (44)
    • Applications (3.273)
      • General (27)
      • Packaging (1.496)
      • Construction (263)
      • Automotive / Transport (810)
      • Electrical Appliances (204)
      • Consumer Goods (200)
      • Medical (183)
      • Technical (51)
      • Other (39)
    • Regions and Countries (3.797)
      • World (187)
      • German-speaking Countries (427)
      • Europe (1.824)
        • General (419)
        • Italy (134)
        • France (151)
        • Spain/Portugal (87)
        • Great Britain/Ireland (483)
        • Low Countries (74)
        • Central Europe (168)
        • Scandinavia (43)
        • Russia (91)
        • Eastern Europe (42)
        • Southeastern Europe (132)
      • North America (454)
      • Asia (650)
        • General (113)
        • China (381)
        • Japan (49)
        • Korea (26)
        • India (81)
      • Middle East (139)
      • Other (36)
      • South America (80)
    • Other (1.769)
      • Recycling/Disposal (1.463)
      • Economic Trend (174)
      • Services (37)
      • Logistics (95)
  • Production and Engineering (3.285)
    • Polymer Materials (2.083)
      • Petrochemicals (42)
      • Charge (404)
        • General (12)
        • Masterbatches (102)
        • Additives (205)
        • Colours (50)
        • Reinforcements/Fillers (35)
      • Polymers (1.611)
        • General (26)
        • Standard Themoplastics (320)
        • Technical Thermoplastics (567)
          • General (19)
          • Styrene Copolymers (57)
          • PC/PMMA (59)
          • Polyamides (194)
          • POM/PBT/PP (63)
          • Technical Compounds (175)
        • PUR (65)
        • Other (633)
          • General (19)
          • Composites/Thermosets (102)
          • High Performance (154)
          • Biopolymers (194)
          • Elastomers/TPE (103)
          • Recyclate (61)
      • Other (26)
    • Machinery (92)
      • Extrusion (20)
        • General (8)
        • Flexible Films (5)
        • Calender (3)
        • Rigid films/Sheets/Thermoforming (1)
        • Pipes/Profiles (3)
      • Injection Moulding (31)
        • General (15)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (31)
    • Research (351)
      • Polymer Materials (121)
      • Technical (12)
      • Product Development (36)
      • Process (67)
      • Application (76)
      • Patents (4)
        • Polymer Materials (2)
        • Process (2)
      • Other (35)
    • New Products (724)
      • Packaging (459)
      • Construction (32)
      • Automotive / Transport (90)
      • Electrical Appliances (24)
      • Consumer Goods (46)
      • Medical (34)
      • Technical (7)
      • Other (32)
    • Other (35)
  • Management (394)
    • Purchasing (65)
    • General Management (77)
    • Company organisation (42)
    • Marketing/Sales (12)
    • Human Resources (4)
    • Finances (67)
    • Logistics (127)
  • People (1.393)
  • Industry (4.471)
    • General (963)
    • Associations/Institutions (1.767)
    • Legislation (888)
    • Environment / Health (843)
    • plas.TV - Plastics unite(d) (10)
  • Events (1.082)
  • Plastic Fantastic (454)
  • Commentaries (63)
  • Interviews (102)
  • Notes by Publisher (54)
© 2022 by Plastics Information Europe, Bad Homburg
Date of print: 10/12/2022
Ref: x24miajua5dmbku1wuuxele1
KIVBHI
All rights reserved.
Access and use is subject to our terms of use.
URL: https://pieweb.plasteurope.com/default.aspx?pageid=302&referrer=mehraus_249484&node=100359