www.pieweb.com

Industry Legislation

USA
Federal government launches plastics-waste-reduction strategy / Reduction of SUPs primary target
23.07.2024
PLASTICS POLLUTION
UN seeks studies on plastics-pollution impact and climate change / Human Rights Council adopts resolutions at latest session
22.07.2024
UKRAINE
Policymakers hammer out ban on single-use plastics / Lawsuit against Russia's Polyplastic to confiscate its assets in the country
18.07.2024
PFAS
EPA to recalibrate plans to regulate PFAS in plastic-container manufacture / Appeal from NGOs
18.07.2024
PACKAGING GERMANY
Consumers value sustainability and waste separation – AVU packaging monitor
18.07.2024
RECYCLING USA
Collection, recycling rates for PET bottle polymer lag Europe / MIT study touts benefits of deposit and return schemes
17.07.2024
UN PLASTICS TREATY
First round of text-based negotiation on SUPs, microplastics, EPR completed
16.07.2024
PURECYCLE
FDA approves use of PureFive rPP for food contact
11.07.2024
PACKAGING REGULATION
Tethered caps now mandatory across the EU / Plastic lids account for up to 7% of recycling streams
09.07.2024
KIMBERLY-CLARK
Personal care products group considers closing UK plant over wet wipe ban / Move could result in 200 job losses
08.07.2024
AUTOMOTIVE
EU imposes provisional anti-dumping tariffs on electric cars from China
04.07.2024
PETROCHEMICAL MARKETS
US, European authorities launch anti-dumping investigations into epoxy resin from Asia
03.07.2024
REACH
ECHA adds new substances to SVCH list / PFAS review on the agenda for September
03.07.2024
FLEXIBLE PACKAGING
Advanced Packaging Association starts lobbying for PA multilayer films
27.06.2024
EDITORIAL
"Woe is me! The cap is hanging from the bottleneck!"
20.06.2024
RECYCLING UK
Government consultation seeks views on exclusion of chemical recycling from ETS scheme
20.06.2024
TITANIUM DIOXIDE
EU imposes provisional punitive tariffs on imports from China
19.06.2024
SINGLE-USE PLASTICS
EU commission opens formal infringement proceedings against Italy / Alleged breach of rules in adopting directive
17.06.2024
AUTOMOTIVE
Germany's automotive industry set to lose about 90,000 jobs by 2030 / Sector must look at new recruitment techniques to plug vacancies gap
11.06.2024
PFAS
US accelerates campaign against “forever chemicals” / Will avalanche of class action lawsuits hit manufacturers?
10.06.2024
AUTOMOTIVE
EU tariffs on Chinese EV imports thrown into doubt / European Commission delays decision on levy
05.06.2024
SPAIN
Waste management body accused of manipulating plastic bottle collection rates / Environmentalists insist on immediate DRS implementation
04.06.2024
PLASTIC PACKAGING GERMANY
Has requirement to offer reusable packaging for takeaway failed? / Minimal usage rate in 2023 / More municipalities look into packaging tax / New regulation by PPWR?
03.06.2024
EUROPEAN PIPES MARKET
“There are so many reporting regulations” / SMEs particularly burdened / Teppfa critical of sector's exclusion from sustainable financing / Interview with general manager Ludo Debever
29.05.2024
TPC
US authorities fine petchems maker USD 30 mn for 2019 blasts / Remedial and safety measures worth USD 80 mn mandated
29.05.2024
Seite 1 von 46
Topic search
Plastics Information Europe
  • Polymer Prices (5.754)
    • Petrochemicals (402)
    • Standard Thermoplastics (898)
    • PET (237)
    • Engineering Thermoplastics (243)
    • Recyclate (345)
      • Standard Thermoplastics / Recyclate (172)
      • Engineering Thermoplastics / Recyclate (173)
    • Polyurethanes (235)
    • High Performance Polymers (2)
    • Composites (171)
    • Announcements (2.547)
    • World Regions (550)
      • China (270)
        • Standard Thermoplastics (136)
        • Engineering Thermoplastics (134)
      • North America (156)
      • Russia (124)
    • Spot Prices (114)
    • Forecasts (10)
  • Companies (32.477)
    • Polymer Materials (16.092)
      • Petrochemicals (2.887)
      • Charge (1.776)
        • General (88)
        • Masterbatches (331)
        • Additives (736)
        • Colours (362)
        • Reinforcements/Fillers (259)
      • Polymers (10.314)
        • General (651)
        • Standard Thermoplastics (3.577)
          • General (112)
          • Polyolefins (1.808)
          • Polystyrenes (318)
          • PVC (628)
          • Polyester (527)
          • Expandable (PS, PP, PE) (184)
        • Technical Thermoplastics (3.064)
          • General (345)
          • Styrene Copolymers (245)
          • PC/PMMA (425)
          • Polyamides (842)
          • POM/PBT/PP (300)
          • Technical Compounds (907)
        • PUR (743)
        • Other (2.279)
          • General (96)
          • Composites/Thermosets (389)
          • High Performance (571)
          • Biopolymers (663)
          • Elastomers/TPE (346)
          • Recyclate (214)
      • Distribution (1.115)
    • Machinery (1.052)
      • General (27)
      • Plant Construction (129)
      • Core Machines (720)
        • General (86)
        • Extrusion (175)
        • Injection Moulding (356)
        • Blow Moulding (71)
        • Foam (12)
        • PUR (16)
        • Compression Moulding (4)
      • Peripherals (172)
        • General (31)
        • Control Systems (4)
        • Automatisation (32)
        • Dies/Tools/Moulds (92)
        • Components (13)
      • Finishing (4)
    • Processing (6.733)
      • General (840)
      • Extrusion (2.212)
        • General (110)
        • Flexible Films (1.065)
        • Rigid Films/Sheet (360)
        • Pipes (331)
        • Profiles/Rods (252)
        • Other (94)
      • Injection Moulding (1.612)
      • Blow Moulding (486)
      • PUR (278)
      • Other (1.074)
        • General (114)
        • Foam (298)
        • Composites/Thermosets (332)
        • Thermoforming (205)
        • Rotational Moulding (31)
        • Additive Manufacturing (94)
      • Finishing (231)
    • Application (6.862)
      • General (124)
      • Packaging (2.960)
      • Construction (682)
      • Automotive / Transport (1.571)
      • Electrical Appliances (319)
      • Consumer Goods (637)
      • Medical (371)
      • Technical (198)
    • Other (1.738)
      • Recycling/Disposal (1.413)
      • Services (244)
      • Logistics (81)
  • Commercial Register (105)
    • Insolvency (100)
    • Changes (5)
  • Markets (21.688)
    • Polymer Materials (9.416)
      • Petrochemicals (2.283)
      • Charge (826)
        • General (38)
        • Masterbatches (90)
        • Additives (328)
        • Colours (151)
        • Reinforcements/Fillers (219)
      • Polymers (5.949)
        • General (678)
        • Standard Thermoplastics (2.291)
          • General (74)
          • Polyolefins (1.136)
          • Polystyrenes (151)
          • PVC (472)
          • Polyester (325)
          • Expandable (PS, PP, PE) (133)
        • Technical Thermoplastics (1.219)
          • General (87)
          • Styrene Copolymers (98)
          • PC/PMMA (141)
          • Polyamides (415)
          • POM/PBT/PP (106)
          • Technical Compounds (372)
        • PUR (434)
        • Other (1.327)
          • General (43)
          • Composites/Thermosets (286)
          • High Performance (292)
          • Biopolymers (412)
          • Elastomers/TPE (132)
          • Recyclate (162)
      • Other Materials (57)
      • Distribution (301)
    • Machinery (495)
      • General (127)
      • Plant Construction (14)
      • Core Machines (283)
        • General (106)
        • Extrusion (36)
        • Injection Moulding (120)
        • Blow Moulding (14)
        • PUR (5)
        • Compression Moulding (2)
      • Peripherals (71)
        • General (21)
        • Automatisation (16)
        • Dies/Tools/Moulds (34)
    • Processing (1.626)
      • General (398)
      • Extrusion (592)
        • General (20)
        • Flexible Films (288)
        • Rigid Films/Sheets (115)
        • Pipes (70)
        • Profiles/Rods (89)
        • Other (10)
      • Injection Moulding (176)
      • Blow Moulding (43)
      • PUR (76)
      • Other (297)
        • General (20)
        • Foam (75)
        • Composites/Thermosets (136)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (38)
      • Finishing (44)
    • Applications (3.778)
      • General (34)
      • Packaging (1.807)
      • Construction (288)
      • Automotive / Transport (908)
      • Electrical Appliances (211)
      • Consumer Goods (237)
      • Medical (194)
      • Technical (55)
      • Other (44)
    • Regions and Countries (3.974)
      • World (194)
      • German-speaking Countries (464)
      • Europe (1.917)
        • General (456)
        • Italy (142)
        • France (153)
        • Spain/Portugal (96)
        • Great Britain/Ireland (496)
        • Low Countries (74)
        • Central Europe (172)
        • Scandinavia (44)
        • Russia (101)
        • Eastern Europe (45)
        • Southeastern Europe (138)
      • North America (475)
      • Asia (667)
        • General (118)
        • China (389)
        • Japan (49)
        • Korea (26)
        • India (85)
      • Middle East (140)
      • Other (37)
      • South America (80)
    • Other (2.399)
      • Recycling/Disposal (1.814)
      • Economic Trend (311)
      • Services (40)
      • Logistics (182)
      • Energy (52)
  • Production and Engineering (3.610)
    • Polymer Materials (2.261)
      • Petrochemicals (53)
      • Charge (430)
        • General (12)
        • Masterbatches (110)
        • Additives (220)
        • Colours (53)
        • Reinforcements/Fillers (35)
      • Polymers (1.748)
        • General (28)
        • Standard Themoplastics (351)
        • Technical Thermoplastics (584)
          • General (19)
          • Styrene Copolymers (61)
          • PC/PMMA (62)
          • Polyamides (198)
          • POM/PBT/PP (65)
          • Technical Compounds (179)
        • PUR (66)
        • Other (719)
          • General (21)
          • Composites/Thermosets (106)
          • High Performance (158)
          • Biopolymers (231)
          • Elastomers/TPE (109)
          • Recyclate (94)
      • Other (30)
    • Machinery (94)
      • Extrusion (20)
        • General (8)
        • Flexible Films (5)
        • Calender (3)
        • Rigid films/Sheets/Thermoforming (1)
        • Pipes/Profiles (3)
      • Injection Moulding (31)
        • General (15)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (33)
    • Research (406)
      • Polymer Materials (135)
      • Technical (12)
      • Product Development (40)
      • Process (78)
      • Application (87)
      • Patents (4)
        • Polymer Materials (2)
        • Process (2)
      • Other (50)
    • New Products (811)
      • Packaging (529)
      • Construction (33)
      • Automotive / Transport (97)
      • Electrical Appliances (26)
      • Consumer Goods (47)
      • Medical (36)
      • Technical (7)
      • Other (36)
    • Other (38)
  • Management (593)
    • Purchasing (96)
    • General Management (123)
    • Company organisation (43)
    • Marketing/Sales (14)
    • Human Resources (7)
    • Finances (85)
    • Logistics (225)
  • People (1.455)
  • Industry (5.498)
    • General (1.107)
    • Associations/Institutions (2.131)
    • Legislation (1.141)
    • Environment / Health (1.109)
    • plas.TV - Plastics unite(d) (10)
  • Events (1.112)
  • Plastic Fantastic (503)
  • Commentaries (77)
  • Interviews (122)
  • Notes by Publisher (68)
© 2024 by Plastics Information Europe, Bad Homburg
Date of print: 24/07/2024
Ref: rkcn1z2emrhyq245rvw0zh45
KIVBHI
All rights reserved.
Access and use is subject to our terms of use.
URL: https://pieweb.plasteurope.com/default.aspx?pageid=302&referrer=mehraus_237788&node=100360