www.pieweb.com

Companies Processing General

LENZING
Fibre group to focus on circular economy
29.06.2022
COVERIS
Investment in Austrian site / Production of five-layer stretch films for silage bales
16.06.2022
SUPPLIER INDUSTRY
German companies feel sandwiched due to cost increases for energy and raw materials / Fair distribution of burden called for / Better business expectations for auto suppliers
08.06.2022
SIG COMBIBLOC
Scholle PIN integrated into SIG from 1 June / Combined group plans to make fibre-based pouches
08.06.2022
AUTOMOTIVE MARKET
Car component suppliers face major sector shifts / Light vehicle sales could remain below pre-pandemic levels until 2030 / McKinsey report outlines ways to keep up with changing industry
13.05.2022
PLASTICS MARKETS
“If we comply with this dictated system, there will only be losers in the medium term – because with no market there is no profit” / Letter from a group of plastics processors to their own industry
05.05.2022
DOW
Robust Q1 demand lifts profits despite rising raw material and energy prices
27.04.2022
HUHTAMAKI
Finnish packaging group to sell Russian plants / Move follows attack on Ukraine / CEO to resume duties
21.04.2022
COVERIS
Montfaucon site in France modernised / More capacity for shrink, stretch hoods from recycled materials
01.03.2022
FORVIA
Holding company created for automotive supplier Faurecia and Hella / CEO Breidenbach to exit / Corzilius heads Lifecycle Solutions
10.02.2022
A SHORT Q&A
Polymers for Europe Alliance chairman Ron Marsh warns of the impact energy surcharges can have on converters
09.02.2022
SIG COMBIBLOC
Acquisition of Scholle IPN for over EUR 1 bn/ Expansion of portfolio and global presence
07.02.2022
DOW
Chemical giant posts “record year” in 2021 / Net profit nearly quintuples / CEO confident about 2022
02.02.2022
HELLA
Chip crisis and cost increases hit operating profit / No immediate improvement in sight
17.01.2022
BERLIN PACKAGING
Purchase of Italy's Premi / 19th EMEA acquisition since 2016
14.01.2022
RÖCHLING
Head of automotive unit appointed to group executive board
06.01.2022
HUHTAMAKI
Packaging giant signs two solar power deals / Step towards being 100% powered by renewable energy
03.01.2022
HUHTAMAKI
CEO Charles Héaulmé takes time off due to illness / Thomas Geust to take over as interim CEO
22.12.2021
GERMAN PLASTICS INDUSTRY
DZ Bank survey: Processor margins under pressure / Nearly one in five shops have rejected orders
17.12.2021
A SHORT Q&A
Private equity expert Frank Hüther discusses the role of investors in the plastics industry
17.12.2021
ANTOLIN
Growth slows significantly in Q3 / Focus on cost control and efficiency
14.12.2021
PROSPERPLAST
Polish manufacturer plans branch in Germany
02.12.2021
KONGSBERG
Competitor Lear acquires automotive interior division / Traction cables sold to Indian Suprajit
18.11.2021
COCA-COLA
Soft drinks giant unveils “Plant Bottle” / Prototype with 100% plant-based materials / 2030 exit from petroleum-based PET in Europe, Japan
15.11.2021
BEVERAGE PACKAGING
Coca-Cola sells core brands in 100% recycled PET bottles / Replacement of almost 30,000 t virgin material in 2021 / Competitor PepsiCo also steps up its game
28.09.2021
Seite 1 von 31
Topic search
Plastics Information Europe
  • Polymer Prices (4.456)
    • Petrochemicals (219)
    • Standard Thermoplastics (644)
    • PET (188)
    • Engineering Thermoplastics (192)
    • Recyclate (247)
      • Standard Thermoplastics / Recyclate (123)
      • Engineering Thermoplastics / Recyclate (124)
    • Polyurethanes (186)
    • High Performance Polymers (2)
    • Composites (122)
    • Announcements (2.212)
    • World Regions (381)
      • China (172)
        • Standard Thermoplastics (87)
        • Engineering Thermoplastics (85)
      • North America (107)
      • Russia (102)
    • Spot Prices (63)
  • Companies (24.084)
    • Polymer Materials (11.832)
      • Petrochemicals (2.084)
      • Charge (1.437)
        • General (65)
        • Masterbatches (278)
        • Additives (584)
        • Colours (283)
        • Reinforcements/Fillers (227)
      • Polymers (7.421)
        • General (410)
        • Standard Thermoplastics (2.657)
          • General (89)
          • Polyolefins (1.305)
          • Polystyrenes (221)
          • PVC (497)
          • Polyester (397)
          • Expandable (PS, PP, PE) (148)
        • Technical Thermoplastics (2.205)
          • General (294)
          • Styrene Copolymers (168)
          • PC/PMMA (286)
          • Polyamides (575)
          • POM/PBT/PP (198)
          • Technical Compounds (684)
        • PUR (537)
        • Other (1.612)
          • General (78)
          • Composites/Thermosets (327)
          • High Performance (416)
          • Biopolymers (486)
          • Elastomers/TPE (254)
          • Recyclate (51)
      • Distribution (890)
    • Machinery (951)
      • General (20)
      • Plant Construction (106)
      • Core Machines (661)
        • General (75)
        • Extrusion (159)
        • Injection Moulding (332)
        • Blow Moulding (65)
        • Foam (10)
        • PUR (16)
        • Compression Moulding (4)
      • Peripherals (160)
        • General (28)
        • Control Systems (4)
        • Automatisation (29)
        • Dies/Tools/Moulds (86)
        • Components (13)
      • Finishing (4)
    • Processing (5.445)
      • General (679)
      • Extrusion (1.784)
        • General (83)
        • Flexible Films (836)
        • Rigid Films/Sheet (300)
        • Pipes (279)
        • Profiles/Rods (213)
        • Other (73)
      • Injection Moulding (1.307)
      • Blow Moulding (388)
      • PUR (213)
      • Other (881)
        • General (96)
        • Foam (235)
        • Composites/Thermosets (295)
        • Thermoforming (163)
        • Rotational Moulding (26)
        • Additive Manufacturing (66)
      • Finishing (193)
    • Application (5.106)
      • General (90)
      • Packaging (2.105)
      • Construction (527)
      • Automotive / Transport (1.259)
      • Electrical Appliances (261)
      • Consumer Goods (421)
      • Medical (298)
      • Technical (145)
    • Other (750)
      • Recycling/Disposal (590)
      • Services (160)
  • Commercial Register (72)
    • Insolvency (67)
    • Changes (5)
  • Markets (15.341)
    • Polymer Materials (6.608)
      • Petrochemicals (1.556)
      • Charge (667)
        • General (32)
        • Masterbatches (78)
        • Additives (252)
        • Colours (113)
        • Reinforcements/Fillers (192)
      • Polymers (4.181)
        • General (331)
        • Standard Thermoplastics (1.758)
          • General (47)
          • Polyolefins (864)
          • Polystyrenes (109)
          • PVC (370)
          • Polyester (255)
          • Expandable (PS, PP, PE) (113)
        • Technical Thermoplastics (855)
          • General (75)
          • Styrene Copolymers (58)
          • PC/PMMA (109)
          • Polyamides (290)
          • POM/PBT/PP (67)
          • Technical Compounds (256)
        • PUR (318)
        • Other (919)
          • General (31)
          • Composites/Thermosets (235)
          • High Performance (228)
          • Biopolymers (298)
          • Elastomers/TPE (100)
          • Recyclate (27)
      • Other Materials (12)
      • Distribution (192)
    • Machinery (439)
      • General (110)
      • Plant Construction (12)
      • Core Machines (249)
        • General (88)
        • Extrusion (32)
        • Injection Moulding (108)
        • Blow Moulding (14)
        • PUR (5)
        • Compression Moulding (2)
      • Peripherals (68)
        • General (21)
        • Automatisation (14)
        • Dies/Tools/Moulds (33)
    • Processing (1.362)
      • General (294)
      • Extrusion (501)
        • General (18)
        • Flexible Films (235)
        • Rigid Films/Sheets (98)
        • Pipes (66)
        • Profiles/Rods (77)
        • Other (7)
      • Injection Moulding (172)
      • Blow Moulding (39)
      • PUR (60)
      • Other (254)
        • General (19)
        • Foam (56)
        • Composites/Thermosets (129)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (22)
      • Finishing (42)
    • Applications (2.546)
      • General (21)
      • Packaging (1.079)
      • Construction (224)
      • Automotive / Transport (702)
      • Electrical Appliances (172)
      • Consumer Goods (136)
      • Medical (143)
      • Technical (41)
      • Other (28)
    • Regions and Countries (3.513)
      • World (170)
      • German-speaking Countries (392)
      • Europe (1.707)
        • General (383)
        • Italy (129)
        • France (151)
        • Spain/Portugal (77)
        • Great Britain/Ireland (456)
        • Low Countries (73)
        • Central Europe (167)
        • Scandinavia (41)
        • Russia (83)
        • Eastern Europe (38)
        • Southeastern Europe (109)
      • North America (403)
      • Asia (596)
        • General (104)
        • China (345)
        • Japan (47)
        • Korea (24)
        • India (76)
      • Middle East (135)
      • Other (34)
      • South America (76)
    • Other (873)
      • Recycling/Disposal (778)
      • Economic Trend (60)
      • Services (29)
      • Logistics (6)
  • Production and Engineering (2.576)
    • Polymer Materials (1.667)
      • Petrochemicals (27)
      • Charge (338)
        • General (12)
        • Masterbatches (77)
        • Additives (175)
        • Colours (39)
        • Reinforcements/Fillers (35)
      • Polymers (1.277)
        • General (15)
        • Standard Themoplastics (247)
        • Technical Thermoplastics (478)
          • General (17)
          • Styrene Copolymers (45)
          • PC/PMMA (48)
          • Polyamides (162)
          • POM/PBT/PP (52)
          • Technical Compounds (154)
        • PUR (54)
        • Other (483)
          • General (17)
          • Composites/Thermosets (93)
          • High Performance (123)
          • Biopolymers (157)
          • Elastomers/TPE (89)
          • Recyclate (4)
      • Other (25)
    • Machinery (86)
      • Extrusion (19)
        • General (8)
        • Flexible Films (4)
        • Calender (3)
        • Rigid films/Sheets/Thermoforming (1)
        • Pipes/Profiles (3)
      • Injection Moulding (31)
        • General (15)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (26)
    • Research (251)
      • Polymer Materials (89)
      • Technical (10)
      • Product Development (27)
      • Process (57)
      • Application (49)
      • Patents (2)
        • Polymer Materials (1)
        • Process (1)
      • Other (17)
    • New Products (547)
      • Packaging (340)
      • Construction (26)
      • Automotive / Transport (71)
      • Electrical Appliances (21)
      • Consumer Goods (31)
      • Medical (27)
      • Technical (7)
      • Other (24)
    • Other (25)
  • Management (166)
    • Purchasing (25)
    • General Management (50)
    • Company organisation (37)
    • Marketing/Sales (8)
    • Human Resources (3)
    • Finances (36)
    • Logistics (7)
  • People (1.257)
  • Industry (2.974)
    • General (677)
    • Associations/Institutions (1.264)
    • Legislation (653)
    • Environment / Health (370)
    • plas.TV - Plastics unite(d) (10)
  • Events (981)
  • Plastic Fantastic (356)
  • Commentaries (52)
  • Interviews (61)
  • Notes by Publisher (28)
© 2022 by Plastics Information Europe, Bad Homburg
Date of print: 29/06/2022
Ref: h5moi4i5dya5zkyndhmeql55
KIVBHI
All rights reserved.
Access and use is subject to our terms of use.
URL: https://pieweb.plasteurope.com/default.aspx?pageid=302&referrer=mehraus_219532&node=100441