www.pieweb.com

Markets Polymers General

TURKEY
Pagev says Turkish processors should halt virgin resin buys until June / Group says Chinese converters following suit / Move comes ahead of expectations for lower prices this summer
14.04.2021
CLARIANT
Membership of Circular Plastics Alliance
13.04.2021
TURKEY
Plastics demand rises in 2020 on higher domestic sales / Import and export volumes grow / Economic woes continue
07.04.2021
PLASTICS INDUSTRY USA
Congress introduces “Break Free From Plastics Pollution Act of 2021”/ Opposition from trade association
31.03.2021
TURKEY
Pagev: Processors to boycott imported polymers from 1 April / Chinese associations said to be on board / Price 'crash' expected by June
25.03.2021
RAW MATERIALS
Chemical market issues hurting coatings makers / Pressure increases as prices rise / Call for protecting European-based production
22.03.2021
CHEMICAL INDUSTRY GERMANY
Coronavirus crisis takes its toll in 2020 but Q4 saves the day / Production rise of 3% forecast for 2021 / Forces majeures could ease by Q3
19.03.2021
RAW MATERIALS
Situation on plastics market "threat" to stable supply of food and medical goods / Resin makers should not take processors "hostage" / Price hikes unjustified / Pallet prices to climb
11.03.2021
CHEMICAL INDUSTRY
Output falls 2% in 2021, but Cefic forecasts 3% growth for 2021 / Cost of EU's Green Deal plans clouds economic outlook
08.03.2021
DOW
Buyer sought for German site infrastructure / Freeing capital for investment
01.03.2021
PETROCHEMICAL MARKETS USA
Slow restart of polymer production / Problems from frost damage, shortage of spare parts and supply-chain failures
26.02.2021
PETROCHEMICAL MARKETS USA
Polymer production on hold in multiple locations / Oil production in Texas reduced by 80%
18.02.2021
PLASTICS AND ENVIRONMENT
New US administration reverses Trump's polluter-friendly rollbacks / Industry and environment stakeholders seek dialogue with Biden
17.02.2021
PETROCHEMICAL MARKETS
European plastics processors alarmed by forces majeures / EuPC and French umbrella organisation Polyvia reminded of 2015 / German engineering plastics converters see signs of bottlenecks
21.01.2021
PLASTICS INDUSTRY
Pandemic hits economy / Global plastics production nears 370m t in 2019 / European output loses market share / Full recovery expected in 2022 / PlasticsEurope report
21.01.2021
RECYCLING
(Petro)chemical instead of mechanical – or perhaps in addition to? / The future of material recycling for plastic packaging / Pyrolysis, solvolysis and other methods at a glance
08.01.2021
SINOCHEM / CHEMCHINA
State-run holding may offer way to avoid US interference into merger
23.12.2020
AOC
Acquisition of Spolchemie plant completed / Focus on polyester resins from recycled PET
21.12.2020
CHEMICAL INDUSTRY
Pandemic hits EU 27 sales, output in first nine months / Circular economy can cushion economic blows
08.12.2020
CHEMICAL INDUSTRY
Weaker demand dampens investment sentiment / Pandemic exacerbates downturn / Ethylene utilisation rates will likely remain weak / McKinsey report
02.12.2020
US PLASTICS INDUSTRY
Trade surplus drops 20% in 2019 / Trade deficit in resins and machinery with Germany
16.11.2020
CIRCULAR ECONOMY
UNEP calls on investors to back circular economy / More scrutiny of potential clients in financial industry's own interest / Plastics suppliers play important role / Pandemic has sent “mixed signals”
10.11.2020
USA
Hurricane Zeta brings further devastation to the US Gulf Coast / Some damage to polymerisation lines
03.11.2020
SPAIN
Covid-19 crisis hits economy / Q3 GDP down year-on-year / Weakness follows pressure on sales by plastics processing sector in 2019 / Volume decline for machinery imports
02.11.2020
MARINE LITTER
Nordic officials call for less plastics pollution / Report proposes UN treaty to benefit businesses
28.10.2020
Seite 1 von 15
Topic search
Plastics Information Europe
  • Polymer Prices (4.456)
    • Petrochemicals (219)
    • Standard Thermoplastics (644)
    • PET (188)
    • Engineering Thermoplastics (192)
    • Recyclate (247)
      • Standard Thermoplastics / Recyclate (123)
      • Engineering Thermoplastics / Recyclate (124)
    • Polyurethanes (186)
    • High Performance Polymers (2)
    • Composites (122)
    • Announcements (2.212)
    • World Regions (381)
      • China (172)
        • Standard Thermoplastics (87)
        • Engineering Thermoplastics (85)
      • North America (107)
      • Russia (102)
    • Spot Prices (63)
  • Companies (24.084)
    • Polymer Materials (11.832)
      • Petrochemicals (2.084)
      • Charge (1.437)
        • General (65)
        • Masterbatches (278)
        • Additives (584)
        • Colours (283)
        • Reinforcements/Fillers (227)
      • Polymers (7.421)
        • General (410)
        • Standard Thermoplastics (2.657)
          • General (89)
          • Polyolefins (1.305)
          • Polystyrenes (221)
          • PVC (497)
          • Polyester (397)
          • Expandable (PS, PP, PE) (148)
        • Technical Thermoplastics (2.205)
          • General (294)
          • Styrene Copolymers (168)
          • PC/PMMA (286)
          • Polyamides (575)
          • POM/PBT/PP (198)
          • Technical Compounds (684)
        • PUR (537)
        • Other (1.612)
          • General (78)
          • Composites/Thermosets (327)
          • High Performance (416)
          • Biopolymers (486)
          • Elastomers/TPE (254)
          • Recyclate (51)
      • Distribution (890)
    • Machinery (951)
      • General (20)
      • Plant Construction (106)
      • Core Machines (661)
        • General (75)
        • Extrusion (159)
        • Injection Moulding (332)
        • Blow Moulding (65)
        • Foam (10)
        • PUR (16)
        • Compression Moulding (4)
      • Peripherals (160)
        • General (28)
        • Control Systems (4)
        • Automatisation (29)
        • Dies/Tools/Moulds (86)
        • Components (13)
      • Finishing (4)
    • Processing (5.445)
      • General (679)
      • Extrusion (1.784)
        • General (83)
        • Flexible Films (836)
        • Rigid Films/Sheet (300)
        • Pipes (279)
        • Profiles/Rods (213)
        • Other (73)
      • Injection Moulding (1.307)
      • Blow Moulding (388)
      • PUR (213)
      • Other (881)
        • General (96)
        • Foam (235)
        • Composites/Thermosets (295)
        • Thermoforming (163)
        • Rotational Moulding (26)
        • Additive Manufacturing (66)
      • Finishing (193)
    • Application (5.106)
      • General (90)
      • Packaging (2.105)
      • Construction (527)
      • Automotive / Transport (1.259)
      • Electrical Appliances (261)
      • Consumer Goods (421)
      • Medical (298)
      • Technical (145)
    • Other (750)
      • Recycling/Disposal (590)
      • Services (160)
  • Commercial Register (72)
    • Insolvency (67)
    • Changes (5)
  • Markets (15.341)
    • Polymer Materials (6.608)
      • Petrochemicals (1.556)
      • Charge (667)
        • General (32)
        • Masterbatches (78)
        • Additives (252)
        • Colours (113)
        • Reinforcements/Fillers (192)
      • Polymers (4.181)
        • General (331)
        • Standard Thermoplastics (1.758)
          • General (47)
          • Polyolefins (864)
          • Polystyrenes (109)
          • PVC (370)
          • Polyester (255)
          • Expandable (PS, PP, PE) (113)
        • Technical Thermoplastics (855)
          • General (75)
          • Styrene Copolymers (58)
          • PC/PMMA (109)
          • Polyamides (290)
          • POM/PBT/PP (67)
          • Technical Compounds (256)
        • PUR (318)
        • Other (919)
          • General (31)
          • Composites/Thermosets (235)
          • High Performance (228)
          • Biopolymers (298)
          • Elastomers/TPE (100)
          • Recyclate (27)
      • Other Materials (12)
      • Distribution (192)
    • Machinery (439)
      • General (110)
      • Plant Construction (12)
      • Core Machines (249)
        • General (88)
        • Extrusion (32)
        • Injection Moulding (108)
        • Blow Moulding (14)
        • PUR (5)
        • Compression Moulding (2)
      • Peripherals (68)
        • General (21)
        • Automatisation (14)
        • Dies/Tools/Moulds (33)
    • Processing (1.362)
      • General (294)
      • Extrusion (501)
        • General (18)
        • Flexible Films (235)
        • Rigid Films/Sheets (98)
        • Pipes (66)
        • Profiles/Rods (77)
        • Other (7)
      • Injection Moulding (172)
      • Blow Moulding (39)
      • PUR (60)
      • Other (254)
        • General (19)
        • Foam (56)
        • Composites/Thermosets (129)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (22)
      • Finishing (42)
    • Applications (2.546)
      • General (21)
      • Packaging (1.079)
      • Construction (224)
      • Automotive / Transport (702)
      • Electrical Appliances (172)
      • Consumer Goods (136)
      • Medical (143)
      • Technical (41)
      • Other (28)
    • Regions and Countries (3.513)
      • World (170)
      • German-speaking Countries (392)
      • Europe (1.707)
        • General (383)
        • Italy (129)
        • France (151)
        • Spain/Portugal (77)
        • Great Britain/Ireland (456)
        • Low Countries (73)
        • Central Europe (167)
        • Scandinavia (41)
        • Russia (83)
        • Eastern Europe (38)
        • Southeastern Europe (109)
      • North America (403)
      • Asia (596)
        • General (104)
        • China (345)
        • Japan (47)
        • Korea (24)
        • India (76)
      • Middle East (135)
      • Other (34)
      • South America (76)
    • Other (873)
      • Recycling/Disposal (778)
      • Economic Trend (60)
      • Services (29)
      • Logistics (6)
  • Production and Engineering (2.576)
    • Polymer Materials (1.667)
      • Petrochemicals (27)
      • Charge (338)
        • General (12)
        • Masterbatches (77)
        • Additives (175)
        • Colours (39)
        • Reinforcements/Fillers (35)
      • Polymers (1.277)
        • General (15)
        • Standard Themoplastics (247)
        • Technical Thermoplastics (478)
          • General (17)
          • Styrene Copolymers (45)
          • PC/PMMA (48)
          • Polyamides (162)
          • POM/PBT/PP (52)
          • Technical Compounds (154)
        • PUR (54)
        • Other (483)
          • General (17)
          • Composites/Thermosets (93)
          • High Performance (123)
          • Biopolymers (157)
          • Elastomers/TPE (89)
          • Recyclate (4)
      • Other (25)
    • Machinery (86)
      • Extrusion (19)
        • General (8)
        • Flexible Films (4)
        • Calender (3)
        • Rigid films/Sheets/Thermoforming (1)
        • Pipes/Profiles (3)
      • Injection Moulding (31)
        • General (15)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (26)
    • Research (251)
      • Polymer Materials (89)
      • Technical (10)
      • Product Development (27)
      • Process (57)
      • Application (49)
      • Patents (2)
        • Polymer Materials (1)
        • Process (1)
      • Other (17)
    • New Products (547)
      • Packaging (340)
      • Construction (26)
      • Automotive / Transport (71)
      • Electrical Appliances (21)
      • Consumer Goods (31)
      • Medical (27)
      • Technical (7)
      • Other (24)
    • Other (25)
  • Management (166)
    • Purchasing (25)
    • General Management (50)
    • Company organisation (37)
    • Marketing/Sales (8)
    • Human Resources (3)
    • Finances (36)
    • Logistics (7)
  • People (1.257)
  • Industry (2.974)
    • General (677)
    • Associations/Institutions (1.264)
    • Legislation (653)
    • Environment / Health (370)
    • plas.TV - Plastics unite(d) (10)
  • Events (981)
  • Plastic Fantastic (356)
  • Commentaries (52)
  • Interviews (61)
  • Notes by Publisher (28)
© 2021 by Plastics Information Europe, Bad Homburg
Date of print: 16/04/2021
Ref: 05pg45jmxwjvt3453hyne2fc
KIVBHI
All rights reserved.
Access und use is subject to our terms of use.
URL: https://pieweb.plasteurope.com/default.aspx?pageid=302&referrer=article&node=100412