Companies Technical Thermoplastics Polyamides

BASF Q2 net income swings to a higher-than-expected profit / Chemicals led sales increase on cracker products and monomers	03.08.2021
EMS Sales, operating income hit record highs in H1 / Full-year outlook unchanged / Around EUR 280m for expansion of production in Dormat	23.07.2021
EVONIK Construction of PA 12 extension in Marl completed / Start-up expected in Q4 / Bio-based monomers not a major issue	14.07.2021
BASF 2021 forecast raised for second time / Q2 sales and earnings well above expectations / Pronounced recovery from coronavirus setbacks	13.07.2021
RADICI FY 2020 sales down nearly 7% / Core profit and net income climb / Positive start in Q1	12.07.2021
ASCEND Capacity upgrade for long-chain PA at Greenwood	30.06.2021
BASF Recyclability of multilayer films with PA 6 certified / Classified as fully recyclable under specific conditions	22.06.2021
K.D. FEDDERSEN Plastics distributor to sell recyclate-based compounds from Aurora	21.06.2021
PETROCHEMICAL MARKETS Domo declares force majeure for caprolactam, PA 6 production	02.06.2021
ARKEMA Acquisition of Italian compounder Agiplast / PA 11 plant in Singapore on track / Specialty materials drive Q1 earnings	31.05.2021
LANXESS Full-year 2021 earnings guidance revised upward / Rising demand from automotive industry	21.05.2021
DSM Q1 sales up 13% and volumes soar 21% / Fine-tuning of group outlook for 2021 after recovery of Materials division	21.05.2021
EVONIK Forecast for 2021 upgraded after strong Q1 / Adjusted EBITDA jumps 15% in January-March	14.05.2021
PLASTICS AND ENVIRONMENT DuPont shareholders ask company to disclose pellet-loss figures / NGO challenges US plastics producers on Operation Clean Sweep	13.05.2021
ASCEND Two fires at failure-plagued Pensacola site / PA force majeure persists	12.05.2021
PETROCHEMICAL MARKETS PA 6, PA 6.6, PBT: Lanxess declares force majeure on compounds from North America	05.05.2021
BASF Outlook revised higher / Strong end of 2020 continues into Q1 / Sales up 16%	04.05.2021
RADICI Polyamide specialist investing EUR 35m to boost capacity / New plant in China, expansions in Europe and Mexico	21.04.2021
PETROCHEMICAL MARKETS BASF declares force majeure for PA 6.6 line / Short ADN outage in Chalampé	20.04.2021
EMS Q1 business develops positively / “Pleasing” new order situation / 2021 sales and operating income expected to be higher than 2020	19.04.2021
DOMO New product line for laser-welding applications	19.04.2021
EMS Investments of CHF 300m in five years / Construction of tallest Swiss high-bay warehouse	08.04.2021
DOMO Bamberger Polymers to distribute products in North America	07.04.2021
PETROCHEMICAL MARKETS BASF declares force majeure for PA 6 deliveries from Antwerp	01.04.2021
UPDATE - PETROCHEMICAL MARKETS Invista reports “unforeseen maintenance shutdown” for ADN in the US / Company denies shutdown	25.03.2021

Seite 1 von 27

Topic search

Plastics Information Europe

Polymer Prices (4.456)
- Petrochemicals (219)
- Standard Thermoplastics (644)
- PET (188)
- Engineering Thermoplastics (192)
- Recyclate (247)
  - Standard Thermoplastics / Recyclate (123)
  - Engineering Thermoplastics / Recyclate (124)
- Polyurethanes (186)
- High Performance Polymers (2)
- Composites (122)
- Announcements (2.212)
- World Regions (381)
  - China (172)
    - Standard Thermoplastics (87)
    - Engineering Thermoplastics (85)
  - North America (107)
  - Russia (102)
- Spot Prices (63)
Companies (24.084)
- Polymer Materials (11.832)
  - Petrochemicals (2.084)
  - Charge (1.437)
    - General (65)
    - Masterbatches (278)
    - Additives (584)
    - Colours (283)
    - Reinforcements/Fillers (227)
  - Polymers (7.421)
    - General (410)
    - Standard Thermoplastics (2.657)
      - General (89)
      - Polyolefins (1.305)
      - Polystyrenes (221)
      - PVC (497)
      - Polyester (397)
      - Expandable (PS, PP, PE) (148)
    - Technical Thermoplastics (2.205)
      - General (294)
      - Styrene Copolymers (168)
      - PC/PMMA (286)
      - Polyamides (575)
      - POM/PBT/PP (198)
      - Technical Compounds (684)
    - PUR (537)
    - Other (1.612)
      - General (78)
      - Composites/Thermosets (327)
      - High Performance (416)
      - Biopolymers (486)
      - Elastomers/TPE (254)
      - Recyclate (51)
  - Distribution (890)
- Machinery (951)
  - General (20)
  - Plant Construction (106)
  - Core Machines (661)
    - General (75)
    - Extrusion (159)
    - Injection Moulding (332)
    - Blow Moulding (65)
    - Foam (10)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (160)
    - General (28)
    - Control Systems (4)
    - Automatisation (29)
    - Dies/Tools/Moulds (86)
    - Components (13)
  - Finishing (4)
- Processing (5.445)
  - General (679)
  - Extrusion (1.784)
    - General (83)
    - Flexible Films (836)
    - Rigid Films/Sheet (300)
    - Pipes (279)
    - Profiles/Rods (213)
    - Other (73)
  - Injection Moulding (1.307)
  - Blow Moulding (388)
  - PUR (213)
  - Other (881)
    - General (96)
    - Foam (235)
    - Composites/Thermosets (295)
    - Thermoforming (163)
    - Rotational Moulding (26)
    - Additive Manufacturing (66)
  - Finishing (193)
- Application (5.106)
  - General (90)
  - Packaging (2.105)
  - Construction (527)
  - Automotive / Transport (1.259)
  - Electrical Appliances (261)
  - Consumer Goods (421)
  - Medical (298)
  - Technical (145)
- Other (750)
  - Recycling/Disposal (590)
  - Services (160)
Commercial Register (72)
- Insolvency (67)
- Changes (5)
Markets (15.341)
- Polymer Materials (6.608)
  - Petrochemicals (1.556)
  - Charge (667)
    - General (32)
    - Masterbatches (78)
    - Additives (252)
    - Colours (113)
    - Reinforcements/Fillers (192)
  - Polymers (4.181)
    - General (331)
    - Standard Thermoplastics (1.758)
      - General (47)
      - Polyolefins (864)
      - Polystyrenes (109)
      - PVC (370)
      - Polyester (255)
      - Expandable (PS, PP, PE) (113)
    - Technical Thermoplastics (855)
      - General (75)
      - Styrene Copolymers (58)
      - PC/PMMA (109)
      - Polyamides (290)
      - POM/PBT/PP (67)
      - Technical Compounds (256)
    - PUR (318)
    - Other (919)
      - General (31)
      - Composites/Thermosets (235)
      - High Performance (228)
      - Biopolymers (298)
      - Elastomers/TPE (100)
      - Recyclate (27)
  - Other Materials (12)
  - Distribution (192)
- Machinery (439)
  - General (110)
  - Plant Construction (12)
  - Core Machines (249)
    - General (88)
    - Extrusion (32)
    - Injection Moulding (108)
    - Blow Moulding (14)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (68)
    - General (21)
    - Automatisation (14)
    - Dies/Tools/Moulds (33)
- Processing (1.362)
  - General (294)
  - Extrusion (501)
    - General (18)
    - Flexible Films (235)
    - Rigid Films/Sheets (98)
    - Pipes (66)
    - Profiles/Rods (77)
    - Other (7)
  - Injection Moulding (172)
  - Blow Moulding (39)
  - PUR (60)
  - Other (254)
    - General (19)
    - Foam (56)
    - Composites/Thermosets (129)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (22)
  - Finishing (42)
- Applications (2.546)
  - General (21)
  - Packaging (1.079)
  - Construction (224)
  - Automotive / Transport (702)
  - Electrical Appliances (172)
  - Consumer Goods (136)
  - Medical (143)
  - Technical (41)
  - Other (28)
- Regions and Countries (3.513)
  - World (170)
  - German-speaking Countries (392)
  - Europe (1.707)
    - General (383)
    - Italy (129)
    - France (151)
    - Spain/Portugal (77)
    - Great Britain/Ireland (456)
    - Low Countries (73)
    - Central Europe (167)
    - Scandinavia (41)
    - Russia (83)
    - Eastern Europe (38)
    - Southeastern Europe (109)
  - North America (403)
  - Asia (596)
    - General (104)
    - China (345)
    - Japan (47)
    - Korea (24)
    - India (76)
  - Middle East (135)
  - Other (34)
  - South America (76)
- Other (873)
  - Recycling/Disposal (778)
  - Economic Trend (60)
  - Services (29)
  - Logistics (6)
Production and Engineering (2.576)
- Polymer Materials (1.667)
  - Petrochemicals (27)
  - Charge (338)
    - General (12)
    - Masterbatches (77)
    - Additives (175)
    - Colours (39)
    - Reinforcements/Fillers (35)
  - Polymers (1.277)
    - General (15)
    - Standard Themoplastics (247)
    - Technical Thermoplastics (478)
      - General (17)
      - Styrene Copolymers (45)
      - PC/PMMA (48)
      - Polyamides (162)
      - POM/PBT/PP (52)
      - Technical Compounds (154)
    - PUR (54)
    - Other (483)
      - General (17)
      - Composites/Thermosets (93)
      - High Performance (123)
      - Biopolymers (157)
      - Elastomers/TPE (89)
      - Recyclate (4)
  - Other (25)
- Machinery (86)
  - Extrusion (19)
    - General (8)
    - Flexible Films (4)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (31)
    - General (15)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (26)
- Research (251)
  - Polymer Materials (89)
  - Technical (10)
  - Product Development (27)
  - Process (57)
  - Application (49)
  - Patents (2)
    - Polymer Materials (1)
    - Process (1)
  - Other (17)
- New Products (547)
  - Packaging (340)
  - Construction (26)
  - Automotive / Transport (71)
  - Electrical Appliances (21)
  - Consumer Goods (31)
  - Medical (27)
  - Technical (7)
  - Other (24)
- Other (25)
Management (166)
- Purchasing (25)
- General Management (50)
- Company organisation (37)
- Marketing/Sales (8)
- Human Resources (3)
- Finances (36)
- Logistics (7)
People (1.257)
Industry (2.974)
- General (677)
- Associations/Institutions (1.264)
- Legislation (653)
- Environment / Health (370)
- plas.TV - Plastics unite(d) (10)
Events (981)
Plastic Fantastic (356)
Commentaries (52)
Interviews (61)
Notes by Publisher (28)