www.pieweb.com

Polymer Prices Engineering Thermoplastics

POLYMER PRICES
Engineering thermoplastics October 2020: No price increases at start of new quarter / Demand remains weak / Producers utilise lull for maintenance work / Delivery delays until start of 2021
05.11.2020
POLYMER PRICES
Engineering thermoplastics September 2020: Stable prices across the board / Automotive industry forecasts weak demand until 2021 / Lamps and lights expected to do well in the dark months / Price rises at the start of the new quarter?
06.10.2020
POLYMER PRICES
Engineering thermoplastics August 2020: Polycarbonate prices freeze / Glass fibre-reinforced polyamides down / Longer-term agreements stabilise PBT business / PMMA price will follow increase in cost of MMA
04.09.2020
POLYMER PRICES
Engineering thermoplastics July 2020: PA prices decline despite slight increase in feedstocks / PMMA likely to see distribution war / Slowdown in demand in August / Automotive situation varies across regions
06.08.2020
POLYMER PRICES
Engineering thermoplastics June 2020: Prices fall to near-record lows / Producers fight plummeting prices with little success / Demand livelier but still weak / Automotive gives a glimmer of hope
06.07.2020
POLYMER PRICES
Engineering thermoplastics May 2020: Significant price cuts with only a few exceptions / Demand from auto production still poor / Producers' output control begins to have effect
05.06.2020
POLYMER PRICES
Engineering thermoplastics April 2020: Small price cuts initially / Hesitant pick-up in demand / Volume planning in price negotiations / Substantial reductions expected in May
07.05.2020
POLYMER PRICES
Engineering thermoplastics March 2020: Most grades roll over / Only polyamides on the decline / Benzene crash to overshadow April / E&E sector could stabilise prices for POM and PBT
06.04.2020
POLYMER PRICES
Engineering thermoplastics February 2020: Price stability on a broad front / Quarterly agreements provide support / Demand slightly above expectations / Differing trends likely in March
05.03.2020
POLYMER PRICES
Engineering Thermoplastics January 2020: ABS firmer / PA 6.6, PMMA and PP compounds lower / PA 6 base polymers expected to push up compounds in the medium term / Demand slowly recovers
06.02.2020
ABS
Realignment of grades in PIE's price reports / Extrusion and injection moulding materials now separate / Producers from Asia targeting Europe more strongly / Surplus puts pressure on European producers' margins
05.02.2020
POLYMER PRICES
Engineering Thermoplastics December 2019: Year ends quietly / Production plants running with reduced output / January starts late because of weak automotive segment / Significant reductions announced for polyamide 6.6
07.01.2020
POLYMER PRICES
Engineering Thermoplastics November 2019: Downward drift continues / Notations crumble, but not in one fell swoop / No interruption to market weakness / Price pressure expected to dominate in December
05.12.2019
POLYMER PRICES
Engineering Thermoplastics October 2019: Prices start to dive / First part of quarterly reductions reflected in the monthly transactions / More decreases expected in November / Sales in crisis mode
06.11.2019
POLYMER PRICES
Engineering Thermoplastics September 2019: Most producers keep prices stable at end of Q3 / Only PA 6.6 sees minor reductions / October is start of a new quarter and new game / Buyers will insist on price cuts
07.10.2019
POLYMER PRICES
Engineering Thermoplastics August 2019: Rollover domination a surprise / Market dead as a doornail / Transactions almost non-existent / Business expected to pick up in September / Heavy price pressure prevails
05.09.2019
POLYMER PRICES
Engineering Thermoplastics July 2019: Slump in auto industry broadly drags prices down / Only PBT and POM still stable / Reductions in quarterly prices will add pressure to monthly transactions in August
06.08.2019
POLYMER PRICES
Engineering Thermoplastics June 2019: Majority of prices on the decline / Weak automotive demand puts more pressure on notations / Downtrend likely to continue in July
04.07.2019
POLYMER PRICES
Engineering Thermoplastics May 2019: Price pressure continues / Producers have trouble keeping notations stable / Automotive slump remains key concern / More reductions probable
06.06.2019
POLYMER PRICES
Engineering Thermoplastics April 2019: Producers regulate supply to keep notations mostly stable / Demand remains slow / Price cuts for polyamides probable in May
07.05.2019
POLYMER PRICES
Engineering Thermoplastics March 2019: Polyamide notations slide / Otherwise prices remain stable in final month of quarter / Demand still weak / Price cuts to be expected in April
04.04.2019
POLYMER PRICES
Engineering Thermoplastics February 2019: Depression in car industry hits hard / Prices fall in many places / Only quarterly agreements continue to stabilise / Automotive expected to remain weak / Further price erosion likely in March
06.03.2019
POLYMER PRICES
Engineering Thermoplastics January 2019: Producers keep prices largely stable / Demand from automotive sector becomes more critical / Price pressure will rise further in February
06.02.2019
POLYMER PRICES
Engineering Thermoplastics December 2018: Slump in auto production is reflected in prices / Significant decline with PC / PMMA also starts to slide / Downward trend could intensify in January
07.01.2019
POLYMER PRICES
Engineering Thermoplastics November 2018: Falling automotive demand leads to price erosion / Tight supply stabilises PA 6.6, PBT and POM / Downtrend could gain momentum in December
06.12.2018
Seite 1 von 8
Topic search
Plastics Information Europe
  • Polymer Prices (4.456)
    • Petrochemicals (219)
    • Standard Thermoplastics (644)
    • PET (188)
    • Engineering Thermoplastics (192)
    • Recyclate (247)
      • Standard Thermoplastics / Recyclate (123)
      • Engineering Thermoplastics / Recyclate (124)
    • Polyurethanes (186)
    • High Performance Polymers (2)
    • Composites (122)
    • Announcements (2.212)
    • World Regions (381)
      • China (172)
        • Standard Thermoplastics (87)
        • Engineering Thermoplastics (85)
      • North America (107)
      • Russia (102)
    • Spot Prices (63)
  • Companies (24.084)
    • Polymer Materials (11.832)
      • Petrochemicals (2.084)
      • Charge (1.437)
        • General (65)
        • Masterbatches (278)
        • Additives (584)
        • Colours (283)
        • Reinforcements/Fillers (227)
      • Polymers (7.421)
        • General (410)
        • Standard Thermoplastics (2.657)
          • General (89)
          • Polyolefins (1.305)
          • Polystyrenes (221)
          • PVC (497)
          • Polyester (397)
          • Expandable (PS, PP, PE) (148)
        • Technical Thermoplastics (2.205)
          • General (294)
          • Styrene Copolymers (168)
          • PC/PMMA (286)
          • Polyamides (575)
          • POM/PBT/PP (198)
          • Technical Compounds (684)
        • PUR (537)
        • Other (1.612)
          • General (78)
          • Composites/Thermosets (327)
          • High Performance (416)
          • Biopolymers (486)
          • Elastomers/TPE (254)
          • Recyclate (51)
      • Distribution (890)
    • Machinery (951)
      • General (20)
      • Plant Construction (106)
      • Core Machines (661)
        • General (75)
        • Extrusion (159)
        • Injection Moulding (332)
        • Blow Moulding (65)
        • Foam (10)
        • PUR (16)
        • Compression Moulding (4)
      • Peripherals (160)
        • General (28)
        • Control Systems (4)
        • Automatisation (29)
        • Dies/Tools/Moulds (86)
        • Components (13)
      • Finishing (4)
    • Processing (5.445)
      • General (679)
      • Extrusion (1.784)
        • General (83)
        • Flexible Films (836)
        • Rigid Films/Sheet (300)
        • Pipes (279)
        • Profiles/Rods (213)
        • Other (73)
      • Injection Moulding (1.307)
      • Blow Moulding (388)
      • PUR (213)
      • Other (881)
        • General (96)
        • Foam (235)
        • Composites/Thermosets (295)
        • Thermoforming (163)
        • Rotational Moulding (26)
        • Additive Manufacturing (66)
      • Finishing (193)
    • Application (5.106)
      • General (90)
      • Packaging (2.105)
      • Construction (527)
      • Automotive / Transport (1.259)
      • Electrical Appliances (261)
      • Consumer Goods (421)
      • Medical (298)
      • Technical (145)
    • Other (750)
      • Recycling/Disposal (590)
      • Services (160)
  • Commercial Register (72)
    • Insolvency (67)
    • Changes (5)
  • Markets (15.341)
    • Polymer Materials (6.608)
      • Petrochemicals (1.556)
      • Charge (667)
        • General (32)
        • Masterbatches (78)
        • Additives (252)
        • Colours (113)
        • Reinforcements/Fillers (192)
      • Polymers (4.181)
        • General (331)
        • Standard Thermoplastics (1.758)
          • General (47)
          • Polyolefins (864)
          • Polystyrenes (109)
          • PVC (370)
          • Polyester (255)
          • Expandable (PS, PP, PE) (113)
        • Technical Thermoplastics (855)
          • General (75)
          • Styrene Copolymers (58)
          • PC/PMMA (109)
          • Polyamides (290)
          • POM/PBT/PP (67)
          • Technical Compounds (256)
        • PUR (318)
        • Other (919)
          • General (31)
          • Composites/Thermosets (235)
          • High Performance (228)
          • Biopolymers (298)
          • Elastomers/TPE (100)
          • Recyclate (27)
      • Other Materials (12)
      • Distribution (192)
    • Machinery (439)
      • General (110)
      • Plant Construction (12)
      • Core Machines (249)
        • General (88)
        • Extrusion (32)
        • Injection Moulding (108)
        • Blow Moulding (14)
        • PUR (5)
        • Compression Moulding (2)
      • Peripherals (68)
        • General (21)
        • Automatisation (14)
        • Dies/Tools/Moulds (33)
    • Processing (1.362)
      • General (294)
      • Extrusion (501)
        • General (18)
        • Flexible Films (235)
        • Rigid Films/Sheets (98)
        • Pipes (66)
        • Profiles/Rods (77)
        • Other (7)
      • Injection Moulding (172)
      • Blow Moulding (39)
      • PUR (60)
      • Other (254)
        • General (19)
        • Foam (56)
        • Composites/Thermosets (129)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (22)
      • Finishing (42)
    • Applications (2.546)
      • General (21)
      • Packaging (1.079)
      • Construction (224)
      • Automotive / Transport (702)
      • Electrical Appliances (172)
      • Consumer Goods (136)
      • Medical (143)
      • Technical (41)
      • Other (28)
    • Regions and Countries (3.513)
      • World (170)
      • German-speaking Countries (392)
      • Europe (1.707)
        • General (383)
        • Italy (129)
        • France (151)
        • Spain/Portugal (77)
        • Great Britain/Ireland (456)
        • Low Countries (73)
        • Central Europe (167)
        • Scandinavia (41)
        • Russia (83)
        • Eastern Europe (38)
        • Southeastern Europe (109)
      • North America (403)
      • Asia (596)
        • General (104)
        • China (345)
        • Japan (47)
        • Korea (24)
        • India (76)
      • Middle East (135)
      • Other (34)
      • South America (76)
    • Other (873)
      • Recycling/Disposal (778)
      • Economic Trend (60)
      • Services (29)
      • Logistics (6)
  • Production and Engineering (2.576)
    • Polymer Materials (1.667)
      • Petrochemicals (27)
      • Charge (338)
        • General (12)
        • Masterbatches (77)
        • Additives (175)
        • Colours (39)
        • Reinforcements/Fillers (35)
      • Polymers (1.277)
        • General (15)
        • Standard Themoplastics (247)
        • Technical Thermoplastics (478)
          • General (17)
          • Styrene Copolymers (45)
          • PC/PMMA (48)
          • Polyamides (162)
          • POM/PBT/PP (52)
          • Technical Compounds (154)
        • PUR (54)
        • Other (483)
          • General (17)
          • Composites/Thermosets (93)
          • High Performance (123)
          • Biopolymers (157)
          • Elastomers/TPE (89)
          • Recyclate (4)
      • Other (25)
    • Machinery (86)
      • Extrusion (19)
        • General (8)
        • Flexible Films (4)
        • Calender (3)
        • Rigid films/Sheets/Thermoforming (1)
        • Pipes/Profiles (3)
      • Injection Moulding (31)
        • General (15)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (26)
    • Research (251)
      • Polymer Materials (89)
      • Technical (10)
      • Product Development (27)
      • Process (57)
      • Application (49)
      • Patents (2)
        • Polymer Materials (1)
        • Process (1)
      • Other (17)
    • New Products (547)
      • Packaging (340)
      • Construction (26)
      • Automotive / Transport (71)
      • Electrical Appliances (21)
      • Consumer Goods (31)
      • Medical (27)
      • Technical (7)
      • Other (24)
    • Other (25)
  • Management (166)
    • Purchasing (25)
    • General Management (50)
    • Company organisation (37)
    • Marketing/Sales (8)
    • Human Resources (3)
    • Finances (36)
    • Logistics (7)
  • People (1.257)
  • Industry (2.974)
    • General (677)
    • Associations/Institutions (1.264)
    • Legislation (653)
    • Environment / Health (370)
    • plas.TV - Plastics unite(d) (10)
  • Events (981)
  • Plastic Fantastic (356)
  • Commentaries (52)
  • Interviews (61)
  • Notes by Publisher (28)
© 2020 by Plastics Information Europe, Bad Homburg
Date of print: 01/12/2020
Ref: wueocq45jte3fcb4a5gc4i55
KIVBHI
All rights reserved.
Access und use is subject to our terms of use.
URL: https://pieweb.plasteurope.com/default.aspx?pageid=302&referrer=article&node=100041