www.pieweb.com
Strengthen your position in business negotiations!
  • European market reports for standard and engineering,
    thermoplastics, polyurethanes, recyclate, composites/GRP,
    feedstocks – more than 100 grades of polymer covered.
  • MyPrices – individually configured reports and e-mail alerts
  • Comparative and analytical tools

More about

BOPP FILM MARKET
Plant expansion still too fast for healthy consumption growth / Capacity utilisation below 70% / Consolidation unavoidable / Situation in China unclear / Middle East expands single-mindedly
02.05.2013
POLYMER PRICES
Engineering Thermoplastics in July 2012: ABS, PA and PP feel the effect of June's feedstock slide / PC, PBT and POM stable / PMMA up slightly / Back pressure generated by reversal of feedstock notations / August still stable
06.08.2012
POLYMER PRICES
Engineering Thermoplastics in January 2012: Rollover predominates / Initial increases for ABS, PA 6 and PP / Restocking / Automotive and E&E sectors take off / Feedstocks rise by triple digits
06.02.2012
POLYMER PRICES
Engineering Thermoplastics in December 2011: Picture dominated by moderate falls / Production cutbacks coincide with subdued end-of-year demand / Costs likely to rise in January / Benzene takes a great leap
05.01.2012
POLYMER PRICES
Engineering thermoplastics in September 2011: Initial weaknesses appear / ABS, PC, PA and PP compounds begin to crumble / So far the overall picture still remains one of stability / Benzene and butadiene at last decline
07.10.2011
POLYMER PRICES
Engineering thermoplastics in August 2011: ABS and PBT rise despite holiday lull / Monomer reduction prompts fall in PP compounds / Bottlenecks ease as demand declines / Automotive still lively / Risks of price increases remain
06.09.2011
POLYMER PRICES
Engineering Thermoplastics in July 2011: Prices stable at a high level / ABS, PC and PP respond to the lower cost basis / Supply adequate / Holiday period dampens demand / Stability likely
04.08.2011
POLYMER PRICES
Engineering Thermoplastics in June 2011: Many grades move up again / ABS, polyamides and PBT are hit particularly hard / Butadiene shortage is the driving factor / Demand significantly weaker / Upward pressure should ease in July
06.07.2011
POLYAMIDE
European market boosted by rising car production / Demand to grow by 3.1% per year to 2014
03.01.2011
POLYMER PRICES
Engineering Thermoplastics in August 2010: Prices still under pressure / PC, POM and PBT move up / Polyamides take a breather / Supply remains tight / Delivery times lengthen / Switching to higher gear in September?
06.09.2010
POLYMER PRICES
Engineering Thermoplastics in July 2010: Long-term negotiations drive notations up / Only ABS and PP compounds stable / Shortages further prolong delivery times / Risk of increases despite holiday season
05.08.2010
POLYMER PRICES
Engineering Thermoplastics in June 2010: Hikes continue despite feedstock decline / For many grades of polymer it was a seller's market / Quarterly and semi-annual contracts see consistent upward price momentum
06.07.2010
POLYMER PRICES
Engineering Thermoplastics in May 2010: Prices continue to spiral / All materials aside from PP compounds and PMMA again show triple-digit increases / PA 6.6 goes through the roof / Shortages abound / Outlook varied
07.06.2010
POLYMER PRICES
Engineering Thermoplastics in April 2010: Notations skyrocket / Numerous triple-digit hikes / Supply tightens / Lively demand / Sharp rises expected again in May
06.05.2010
ENGINEERING PLASTICS
Tense PA 6.6 situation beginning to boil over to other engineering plastics / Prudence needed
12.03.2010
PETROCHEMICAL MARKETS
PA 6.6 supply situation increasingly tight / BASF reports “limited availability” / Rhodia upholds FM
03.03.2010
Seite 2 von 2
© 2019 by Plastics Information Europe, Bad Homburg
Date of print: 20/11/2019
Ref: vjoakv2qluj0cz3ufwxizx45
KIVBHI
All rights reserved.
Access und use is subject to our terms of use.
URL: https://pieweb.plasteurope.com/Default.aspx?pageid=320&key=Radici&page=2