Show topic list

Production and Engineering

CIRCULAR ECONOMY Aimplas joins zero-waste project for bio-based industrial ecosystems	24.04.2024
DOW First MobilityScience studio in Europe now open / Tailored R&D services for automotive sector on offer	23.04.2024
TRINSEO Flame-retardant grades made without PFAS, halogenated additives	23.04.2024
BERRY GLOBAL Co-op with Mitsubishi on recyclable barrier solution for thermoformed packaging	19.04.2024
AQUAPAK Production of recyclable crisps packet with Evopak / Use of polyvinyl alcohol-based material	16.04.2024
DOW / P&G Joint development of technology to convert hard-to-recycle packaging / Focus on rPE	10.04.2024
BOREALIS US FDA clears two Borcycle grades for food-grade packaging	08.04.2024
WIS KUNSTSTOFFE PCR recyclates for automotive industry on offer	03.04.2024
PEPSICO Cooperation with reusable packaging provider Vytal / Returnable cups from Koziol with RFID technology	02.04.2024
LOGOPLAST Development of paper bottles with plastic barrier layer / Packaging manufacturer joins Bottle Collective	02.04.2024
PLASTIC PACKAGING Aldi Ireland, Cadbury Australia replace plastic packaging on Easter egg chocolates / UK, Australia see sweet treats as “over packaged”	28.03.2024
BIOPLASTICS Biodegradable polymers decompose on deep-sea floor – University of Tokyo / Rate of degradation on deep-sea floor slower than onshore	27.03.2024
ALIPLAST Recycling specialist publishes guidelines for recyclable cosmetics packaging / Significant sustainability gains touted	27.03.2024
ECKART Lineup of effect pigments to be presented at NPE 2024	22.03.2024
SUSTAINABLE PACKAGING Companies combine to supply packaging film containing 50% recycled material / New product meets strict EU food-grade requirements	21.03.2024
PLAYMOBIL Plant-based ABS, MBS from Ineos Styrolution for Junior product range	20.03.2024
REPSOL Lubricant containers with 60% Reciclex sustainable polyolefins	15.03.2024
TOTALENERGIES Partnership with Bericap to make caps with recyclate for lubricant cans	14.03.2024
COMPOSITES SPAIN Aimplas launches new technology company focused on LFTs	14.03.2024
PAL PLAST New rPA 6 GF grade with up to 80% recyclate	13.03.2024
CHEMICAL RECYCLING Circular Polymer Resources, AmSpec collaborate to certify plastics waste for chemical reclaim / Aim to standardise feed selection	12.03.2024
RESEARCH UK university launches cutting-edge plastics research group / Revolution Plastics Institute to “lead the way towards a world free from plastics pollution”	11.03.2024
AVIENT Cap collaboration with Plastic Bank yields formulation with ocean-bound plastics	08.03.2024
HENKEL Pril dishwashing liquid concentrate supplied in stand-up pouches / Switching to plastic film reduces cabron footprint	07.03.2024
CIRCULAR ECONOMY European project aims to transform industrial areas into sustainable hubs / Focus on cutting energy use, waste emissions	07.03.2024

Seite 1 von 115

Topic search

Plastics Information Europe

Polymer Prices (5.672)
- Petrochemicals (379)
- Standard Thermoplastics (882)
- PET (234)
- Engineering Thermoplastics (240)
- Recyclate (339)
  - Standard Thermoplastics / Recyclate (169)
  - Engineering Thermoplastics / Recyclate (170)
- Polyurethanes (232)
- High Performance Polymers (2)
- Composites (168)
- Announcements (2.539)
- World Regions (541)
  - China (264)
    - Standard Thermoplastics (133)
    - Engineering Thermoplastics (131)
  - North America (153)
  - Russia (124)
- Spot Prices (111)
- Forecasts (5)
Companies (32.005)
- Polymer Materials (15.847)
  - Petrochemicals (2.848)
  - Charge (1.755)
    - General (88)
    - Masterbatches (328)
    - Additives (727)
    - Colours (354)
    - Reinforcements/Fillers (258)
  - Polymers (10.144)
    - General (643)
    - Standard Thermoplastics (3.514)
      - General (112)
      - Polyolefins (1.768)
      - Polystyrenes (315)
      - PVC (619)
      - Polyester (518)
      - Expandable (PS, PP, PE) (182)
    - Technical Thermoplastics (3.024)
      - General (340)
      - Styrene Copolymers (241)
      - PC/PMMA (416)
      - Polyamides (832)
      - POM/PBT/PP (297)
      - Technical Compounds (898)
    - PUR (728)
    - Other (2.235)
      - General (95)
      - Composites/Thermosets (387)
      - High Performance (566)
      - Biopolymers (651)
      - Elastomers/TPE (342)
      - Recyclate (194)
  - Distribution (1.100)
- Machinery (1.043)
  - General (26)
  - Plant Construction (127)
  - Core Machines (715)
    - General (85)
    - Extrusion (174)
    - Injection Moulding (353)
    - Blow Moulding (71)
    - Foam (12)
    - PUR (16)
    - Compression Moulding (4)
  - Peripherals (171)
    - General (30)
    - Control Systems (4)
    - Automatisation (32)
    - Dies/Tools/Moulds (92)
    - Components (13)
  - Finishing (4)
- Processing (6.670)
  - General (828)
  - Extrusion (2.196)
    - General (110)
    - Flexible Films (1.056)
    - Rigid Films/Sheet (358)
    - Pipes (329)
    - Profiles/Rods (249)
    - Other (94)
  - Injection Moulding (1.592)
  - Blow Moulding (484)
  - PUR (272)
  - Other (1.068)
    - General (114)
    - Foam (298)
    - Composites/Thermosets (328)
    - Thermoforming (203)
    - Rotational Moulding (31)
    - Additive Manufacturing (94)
  - Finishing (230)
- Application (6.768)
  - General (124)
  - Packaging (2.909)
  - Construction (673)
  - Automotive / Transport (1.550)
  - Electrical Appliances (318)
  - Consumer Goods (631)
  - Medical (368)
  - Technical (195)
- Other (1.677)
  - Recycling/Disposal (1.367)
  - Services (242)
  - Logistics (68)
Commercial Register (101)
- Insolvency (96)
- Changes (5)
Markets (21.311)
- Polymer Materials (9.249)
  - Petrochemicals (2.248)
  - Charge (816)
    - General (38)
    - Masterbatches (89)
    - Additives (324)
    - Colours (147)
    - Reinforcements/Fillers (218)
  - Polymers (5.833)
    - General (651)
    - Standard Thermoplastics (2.249)
      - General (73)
      - Polyolefins (1.113)
      - Polystyrenes (147)
      - PVC (467)
      - Polyester (319)
      - Expandable (PS, PP, PE) (130)
    - Technical Thermoplastics (1.204)
      - General (86)
      - Styrene Copolymers (97)
      - PC/PMMA (138)
      - Polyamides (412)
      - POM/PBT/PP (104)
      - Technical Compounds (367)
    - PUR (427)
    - Other (1.302)
      - General (42)
      - Composites/Thermosets (285)
      - High Performance (289)
      - Biopolymers (406)
      - Elastomers/TPE (132)
      - Recyclate (148)
  - Other Materials (57)
  - Distribution (295)
- Machinery (492)
  - General (127)
  - Plant Construction (14)
  - Core Machines (280)
    - General (105)
    - Extrusion (35)
    - Injection Moulding (119)
    - Blow Moulding (14)
    - PUR (5)
    - Compression Moulding (2)
  - Peripherals (71)
    - General (21)
    - Automatisation (16)
    - Dies/Tools/Moulds (34)
- Processing (1.615)
  - General (393)
  - Extrusion (590)
    - General (20)
    - Flexible Films (287)
    - Rigid Films/Sheets (114)
    - Pipes (70)
    - Profiles/Rods (89)
    - Other (10)
  - Injection Moulding (174)
  - Blow Moulding (43)
  - PUR (75)
  - Other (296)
    - General (20)
    - Foam (75)
    - Composites/Thermosets (135)
    - Thermoforming (20)
    - Rotational Moulding (8)
    - Additive Manufacturing (38)
  - Finishing (44)
- Applications (3.692)
  - General (33)
  - Packaging (1.762)
  - Construction (282)
  - Automotive / Transport (882)
  - Electrical Appliances (211)
  - Consumer Goods (232)
  - Medical (192)
  - Technical (54)
  - Other (44)
- Regions and Countries (3.945)
  - World (193)
  - German-speaking Countries (461)
  - Europe (1.900)
    - General (452)
    - Italy (139)
    - France (153)
    - Spain/Portugal (94)
    - Great Britain/Ireland (495)
    - Low Countries (74)
    - Central Europe (171)
    - Scandinavia (43)
    - Russia (97)
    - Eastern Europe (44)
    - Southeastern Europe (138)
  - North America (471)
  - Asia (663)
    - General (117)
    - China (387)
    - Japan (49)
    - Korea (26)
    - India (84)
  - Middle East (140)
  - Other (37)
  - South America (80)
- Other (2.318)
  - Recycling/Disposal (1.771)
  - Economic Trend (290)
  - Services (40)
  - Logistics (169)
  - Energy (48)
Production and Engineering (3.567)
- Polymer Materials (2.237)
  - Petrochemicals (52)
  - Charge (425)
    - General (12)
    - Masterbatches (108)
    - Additives (217)
    - Colours (53)
    - Reinforcements/Fillers (35)
  - Polymers (1.730)
    - General (27)
    - Standard Themoplastics (348)
    - Technical Thermoplastics (584)
      - General (19)
      - Styrene Copolymers (61)
      - PC/PMMA (62)
      - Polyamides (198)
      - POM/PBT/PP (65)
      - Technical Compounds (179)
    - PUR (66)
    - Other (705)
      - General (21)
      - Composites/Thermosets (105)
      - High Performance (158)
      - Biopolymers (226)
      - Elastomers/TPE (107)
      - Recyclate (88)
  - Other (30)
- Machinery (93)
  - Extrusion (20)
    - General (8)
    - Flexible Films (5)
    - Calender (3)
    - Rigid films/Sheets/Thermoforming (1)
    - Pipes/Profiles (3)
  - Injection Moulding (31)
    - General (15)
    - Process (10)
    - Tools (4)
    - Automatisation (2)
  - Blow Moulding (10)
  - Other (32)
- Research (402)
  - Polymer Materials (135)
  - Technical (12)
  - Product Development (39)
  - Process (78)
  - Application (86)
  - Patents (4)
    - Polymer Materials (2)
    - Process (2)
  - Other (48)
- New Products (797)
  - Packaging (519)
  - Construction (33)
  - Automotive / Transport (97)
  - Electrical Appliances (25)
  - Consumer Goods (46)
  - Medical (35)
  - Technical (7)
  - Other (35)
- Other (38)
Management (572)
- Purchasing (95)
- General Management (117)
- Company organisation (43)
- Marketing/Sales (14)
- Human Resources (7)
- Finances (85)
- Logistics (211)
People (1.446)
Industry (5.340)
- General (1.082)
- Associations/Institutions (2.071)
- Legislation (1.102)
- Environment / Health (1.075)
- plas.TV - Plastics unite(d) (10)
Events (1.105)
Plastic Fantastic (494)
Commentaries (75)
Interviews (118)
Notes by Publisher (68)