www.pieweb.com

Polymer Prices Engineering Thermoplastics

POLYMER PRICES
Engineering thermoplastics at the end of December 2007: Increases not yet accepted / ABS and PC down again / Supply mostly well-balanced / Only POM tight / Methanol at record high / Significant hikes on the table / Latest transactions higher
07.01.2008
POLYMER PRICES
Engineering thermoplastics at the end of November: Calls for increases mostly on hold / Imports pressure lower end of the ABS, PC and PBT scales / Supply mainly well-balanced / Producers intend to push through significant rises in 2008
06.12.2007
POLYMER PRICES
Engineering thermoplastics at the end of October 2007: Calls for hikes unheeded / Supply mainly stable / K 2007 and German bank holiday reduce demand / Prospects for large Q4 increases uncertain
06.11.2007
POLYMER PRICES
Engineering thermoplastics at the end of September 2007: Q3 closes with stable prices / PA 6 and POM generally tight / Rising feedstock prices will fuel calls for stiff resins rises in Q4
05.10.2007
POLYMER PRICES
Engineering thermoplastics at the end of August: All still calm on the price front / Supply adequate but mixed picture with POM / Automotive continues to drive demand / Few announcements of price hikes
06.09.2007
POLYMER PRICES
Engineering thermoplastics at the end of July 2007: Mostly calm on the price front at the start of the second half-year / Only minor adjustments / Falling costs improve margins / Stable demand / PA 6 tight
06.08.2007
POLYMER PRICES
Engineering thermoplastics at the end of June 2007: Predominantly stable / ABS, PC and PP compounds up slightly / Good capacity use / Some feedstocks short / Longer delivery times / Moderate price hikes planned
05.07.2007
POLYMER PRICES
Engineering thermoplastics at the end of May 2007: Prices still stable / Demand remains high / Supply situation varies / Asian imports stagnate / Feedstock rises drive producers demands
06.06.2007
POLYMER PRICES
Engineering thermoplastics at the end of April 2007: Little price movement / Supplies tight / Demand slow due to Easter holidays / Feedstocks hikes fire up price rounds for Q2
07.05.2007
POLYMER PRICES
Engineering thermoplastics at the end of March 2007: Prices largely stable / Lows adjusted / Supplies of some products limited / Demand continues high in Q2 / Further increases on the table
05.04.2007
POLYMER PRICES
Engineering thermoplastics at the end of February 2007: Strong demand meets adequate supply / Q1 dominated by annual volume contracts / Range narrows for PA, PBT and POM / Tight scope for negotiation
06.03.2007
POLYMER PRICES
Engineering thermoplastics at the end of January 2007: Dearer volume business drives prices / ABS, PA, PBT and POM advance / Only PC is softer / Demand strong / Tendency is up
06.02.2007
POLYMER PRICES
Engineering thermoplastics at the end of December 2006: ABS shows further rise / Producers stand firm on large-volume businesses / Typical seasonal weakness / Big hikes on the table for all polymers
05.01.2007
POLYMER PRICES
Engineering thermoplastics at the end of November 2006: Only ABS higher / Project and pool contracts terminated in large-volume business / Special deals in PC, PA and PMMA curb upward momentum
06.12.2006
POLYMER PRICES
Engineering thermoplastics at the end of October 2006: Prices up slightly / Only PBT unchanged / Some grades tighter / Steep hikes planned for Q4 not yet affecting the large-volume segment
06.11.2006
POLYMER PRICES
Engineering thermoplastics at the end of September 2006: Demand strong / ABS more expensive / PA 6.6 tighter / Higher feedstocks spur sellers´ call for price rises / Up to EUR 200/t more for all polymers in Q4?
06.10.2006
POLYMER PRICES
Engineering thermoplastics at the end of August 2006: Prices stable for all polymers except ABS / Supply shortfalls in sight for ABS, PC and PA / Exchange rate favours Asian imports / Price hikes planned for autumn
06.09.2006
POLYMER PRICES
Engineering thermoplastics at the end of July 2006: ABS and PA move up in Q3 / Ordering activity remains constant / Longer delivery times / Insufficient shipping capacities make distribution difficult
04.08.2006
POLYMER PRICES
Engineering thermoplastics at the end of June 2006: Producer price increases largely successful / Speculative purchases drive prices up / Limited availability / Further hikes in July
06.07.2006
POLYMER PRICES
Engineering thermoplastics at the end of May 2006: Battle for special offers / Lively demand extends delivery times / Prices tend upwards / Producers announce hefty increases
08.06.2006
POLYMER PRICES
Engineering thermoplastics at the end of April 2006: First price rises take effect / Longer delivery times / Notices of fresh hikes for May are on the table / Eastward shift for CDs rescues PC
08.05.2006
POLYMER PRICES
Engineering thermoplastics at the end of March 2006: High prices remain / Long delivery times / Further rises announced for Q2
06.04.2006
POLYMER PRICES
Engineering thermoplastics at the end of February: Notations rise for many grades / Heavy consumption in key industries puts strain on March supplies / Further increases likely in Q2
13.03.2006
POLYMER PRICES
Engineering thermoplastics at the end of January: Some increases accepted in western Europe / Not all grades in sufficient supply / Strong demand from automotive industry / PA set to rise
13.02.2006
POLYMER PRICES
Engineering thermoplastics in December 2005: Mainly calm on the price front with trading activity subdued / Producers are aiming for increases again in January / Buyers largely unconcerned
19.01.2006
Seite 9 von 10
Topic search
Plastics Information Europe
  • Polymer Prices (5.643)
    • Petrochemicals (372)
    • Standard Thermoplastics (877)
    • PET (233)
    • Engineering Thermoplastics (239)
    • Recyclate (337)
      • Standard Thermoplastics / Recyclate (168)
      • Engineering Thermoplastics / Recyclate (169)
    • Polyurethanes (231)
    • High Performance Polymers (2)
    • Composites (167)
    • Announcements (2.534)
    • World Regions (538)
      • China (262)
        • Standard Thermoplastics (132)
        • Engineering Thermoplastics (130)
      • North America (152)
      • Russia (124)
    • Spot Prices (110)
    • Forecasts (3)
  • Companies (31.875)
    • Polymer Materials (15.782)
      • Petrochemicals (2.829)
      • Charge (1.748)
        • General (88)
        • Masterbatches (328)
        • Additives (725)
        • Colours (352)
        • Reinforcements/Fillers (255)
      • Polymers (10.109)
        • General (640)
        • Standard Thermoplastics (3.501)
          • General (112)
          • Polyolefins (1.760)
          • Polystyrenes (315)
          • PVC (618)
          • Polyester (514)
          • Expandable (PS, PP, PE) (182)
        • Technical Thermoplastics (3.014)
          • General (339)
          • Styrene Copolymers (241)
          • PC/PMMA (416)
          • Polyamides (828)
          • POM/PBT/PP (295)
          • Technical Compounds (895)
        • PUR (727)
        • Other (2.227)
          • General (94)
          • Composites/Thermosets (387)
          • High Performance (565)
          • Biopolymers (650)
          • Elastomers/TPE (342)
          • Recyclate (189)
      • Distribution (1.096)
    • Machinery (1.042)
      • General (26)
      • Plant Construction (127)
      • Core Machines (714)
        • General (84)
        • Extrusion (174)
        • Injection Moulding (353)
        • Blow Moulding (71)
        • Foam (12)
        • PUR (16)
        • Compression Moulding (4)
      • Peripherals (171)
        • General (30)
        • Control Systems (4)
        • Automatisation (32)
        • Dies/Tools/Moulds (92)
        • Components (13)
      • Finishing (4)
    • Processing (6.657)
      • General (826)
      • Extrusion (2.193)
        • General (110)
        • Flexible Films (1.053)
        • Rigid Films/Sheet (358)
        • Pipes (329)
        • Profiles/Rods (249)
        • Other (94)
      • Injection Moulding (1.588)
      • Blow Moulding (484)
      • PUR (272)
      • Other (1.065)
        • General (114)
        • Foam (296)
        • Composites/Thermosets (328)
        • Thermoforming (202)
        • Rotational Moulding (31)
        • Additive Manufacturing (94)
      • Finishing (229)
    • Application (6.735)
      • General (123)
      • Packaging (2.892)
      • Construction (670)
      • Automotive / Transport (1.543)
      • Electrical Appliances (317)
      • Consumer Goods (628)
      • Medical (368)
      • Technical (194)
    • Other (1.659)
      • Recycling/Disposal (1.356)
      • Services (239)
      • Logistics (64)
  • Commercial Register (99)
    • Insolvency (94)
    • Changes (5)
  • Markets (21.207)
    • Polymer Materials (9.205)
      • Petrochemicals (2.232)
      • Charge (811)
        • General (38)
        • Masterbatches (89)
        • Additives (324)
        • Colours (145)
        • Reinforcements/Fillers (215)
      • Polymers (5.812)
        • General (647)
        • Standard Thermoplastics (2.244)
          • General (73)
          • Polyolefins (1.111)
          • Polystyrenes (147)
          • PVC (467)
          • Polyester (316)
          • Expandable (PS, PP, PE) (130)
        • Technical Thermoplastics (1.200)
          • General (86)
          • Styrene Copolymers (97)
          • PC/PMMA (138)
          • Polyamides (411)
          • POM/PBT/PP (104)
          • Technical Compounds (364)
        • PUR (426)
        • Other (1.295)
          • General (41)
          • Composites/Thermosets (284)
          • High Performance (288)
          • Biopolymers (404)
          • Elastomers/TPE (132)
          • Recyclate (146)
      • Other Materials (57)
      • Distribution (293)
    • Machinery (492)
      • General (127)
      • Plant Construction (14)
      • Core Machines (280)
        • General (105)
        • Extrusion (35)
        • Injection Moulding (119)
        • Blow Moulding (14)
        • PUR (5)
        • Compression Moulding (2)
      • Peripherals (71)
        • General (21)
        • Automatisation (16)
        • Dies/Tools/Moulds (34)
    • Processing (1.614)
      • General (392)
      • Extrusion (590)
        • General (20)
        • Flexible Films (287)
        • Rigid Films/Sheets (114)
        • Pipes (70)
        • Profiles/Rods (89)
        • Other (10)
      • Injection Moulding (174)
      • Blow Moulding (43)
      • PUR (75)
      • Other (296)
        • General (20)
        • Foam (75)
        • Composites/Thermosets (135)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (38)
      • Finishing (44)
    • Applications (3.673)
      • General (33)
      • Packaging (1.752)
      • Construction (281)
      • Automotive / Transport (877)
      • Electrical Appliances (210)
      • Consumer Goods (230)
      • Medical (192)
      • Technical (54)
      • Other (44)
    • Regions and Countries (3.937)
      • World (193)
      • German-speaking Countries (458)
      • Europe (1.896)
        • General (450)
        • Italy (139)
        • France (153)
        • Spain/Portugal (94)
        • Great Britain/Ireland (494)
        • Low Countries (74)
        • Central Europe (171)
        • Scandinavia (43)
        • Russia (96)
        • Eastern Europe (44)
        • Southeastern Europe (138)
      • North America (471)
      • Asia (662)
        • General (117)
        • China (387)
        • Japan (49)
        • Korea (26)
        • India (83)
      • Middle East (140)
      • Other (37)
      • South America (80)
    • Other (2.286)
      • Recycling/Disposal (1.754)
      • Economic Trend (283)
      • Services (40)
      • Logistics (164)
      • Energy (45)
  • Production and Engineering (3.555)
    • Polymer Materials (2.233)
      • Petrochemicals (52)
      • Charge (424)
        • General (12)
        • Masterbatches (108)
        • Additives (216)
        • Colours (53)
        • Reinforcements/Fillers (35)
      • Polymers (1.728)
        • General (27)
        • Standard Themoplastics (348)
        • Technical Thermoplastics (584)
          • General (19)
          • Styrene Copolymers (61)
          • PC/PMMA (62)
          • Polyamides (198)
          • POM/PBT/PP (65)
          • Technical Compounds (179)
        • PUR (66)
        • Other (703)
          • General (21)
          • Composites/Thermosets (105)
          • High Performance (158)
          • Biopolymers (226)
          • Elastomers/TPE (107)
          • Recyclate (86)
      • Other (29)
    • Machinery (93)
      • Extrusion (20)
        • General (8)
        • Flexible Films (5)
        • Calender (3)
        • Rigid films/Sheets/Thermoforming (1)
        • Pipes/Profiles (3)
      • Injection Moulding (31)
        • General (15)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (32)
    • Research (400)
      • Polymer Materials (134)
      • Technical (12)
      • Product Development (39)
      • Process (78)
      • Application (85)
      • Patents (4)
        • Polymer Materials (2)
        • Process (2)
      • Other (48)
    • New Products (791)
      • Packaging (513)
      • Construction (33)
      • Automotive / Transport (97)
      • Electrical Appliances (25)
      • Consumer Goods (46)
      • Medical (35)
      • Technical (7)
      • Other (35)
    • Other (38)
  • Management (563)
    • Purchasing (93)
    • General Management (116)
    • Company organisation (43)
    • Marketing/Sales (14)
    • Human Resources (6)
    • Finances (85)
    • Logistics (206)
  • People (1.444)
  • Industry (5.292)
    • General (1.075)
    • Associations/Institutions (2.052)
    • Legislation (1.089)
    • Environment / Health (1.066)
    • plas.TV - Plastics unite(d) (10)
  • Events (1.101)
  • Plastic Fantastic (492)
  • Commentaries (74)
  • Interviews (116)
  • Notes by Publisher (67)
Energy Cost Surcharges
Please note:
The polymer prices reported by Plastics Information Europe (PIE) already include any energy cost surcharges of the producers and are not listed separately.

Your PIE Team
© 2024 by Plastics Information Europe, Bad Homburg
Date of print: 28/03/2024
Ref: 3otqbvruwatnhevzsyzk1lva
KIVBHI
All rights reserved.
Access and use is subject to our terms of use.
URL: https://pieweb.plasteurope.com/Default.aspx?pageid=302&referrer=mehraus_244305&node=100041&page=9