www.pieweb.com

Industry Legislation

BRAZIL
Producers' association pushes for higher import duties on chemical products / Competitive disadvantage due to high gas prices
11.09.2024
PFAS
US petition calls for EPA to steer North Carolina water quality / NGO says state is too industry-friendly / Cape Fear region crucial
11.09.2024
PFAS
“You can assume that our concerns will be heard” – interview with GKV president Helen Fürst on strongly worded PFAS letter to German chancellor Scholz
10.09.2024
PFAS
US EPA extends reporting deadline for ‘forever chemicals' / Cites resource constraints as reason
10.09.2024
HUNGARY
National bottle deposit return system officially started / Part of centralised waste management scheme
10.09.2024
PLASTICS AND HEALTH USA
Louisiana district court issues permanent injunction against civil rights evaluation for plant-permitting / End to EPA's environmental justice campaign in US ‘chemicals belt'
09.09.2024
PLASTICS AND ENVIRONMENT
EMF members increase use of recycled content in packaging by 44% in six years / Challenges persist on expanding infrastructure and recycling films, flexibles – progress report
06.09.2024
UK PACKAGING
Tax revenue falls by 6% on lower volumes / Amount of exempted packaging climbs
04.09.2024
SLOVAKIA
Businesses protest tightening state control over DRS operations
02.09.2024
PACKAGING UK
Government spells out how EPR fees could work
29.08.2024
WASTE-EXPORT FRAUD
17 arrested in the UK / ‘Rogue operators' exploit PRN system
28.08.2024
PLASTICS TREATY USA
US seen as shifting position on global plastic-output cuts / Industry slams reports
22.08.2024
AUTOMOTIVE
European Commission redefines anti-dumping tariffs for vehicles manufactured in China / Exception: Tesla
21.08.2024
PLASTICS TAX ASIA
Indonesia to ditch plans for SUP tax / Philippines pushes ahead with levy
21.08.2024
FOOD PACKAGING
UK bodies issue reminder not to use products made from mix of plastics and plant-based materials
20.08.2024
FRANCE
Major payment to EU for non-recycled plastic packaging waste / Much too less reclaim rate
19.08.2024
PFAS
Daikin, Arkema face ‘serious setback' in Lyon lawsuit
16.08.2024
INEOS
Project One gets new lease on life / Environment decisions by Flemish authorities make realisation look irreversible
15.08.2024
GERMANY
Single-Use Plastics Fund Act: Registration portal now open to foreign companies
15.08.2024
CHEMICAL RECYCLING UK
Potential exclusion of chemical reclaim from emissions trading scheme / BPF sides with government
14.08.2024
AUTOMOTIVE INDUSTRY
Europe's trade balance heads towards deficit for first time ever / Battery investment flows to US / China's domestic, international EV car sales soar
13.08.2024
IRELAND & UK
Public support grows for Irish DRS / Rubbish foragers raise concerns / London mulls faster start-up of own scheme
08.08.2024
EU POLICY
Commission cracks down on member states for non-compliance / Environment directives implemented too late or not at all
07.08.2024
MARINE LITTER
Volume of drinks-related rubbish found on UK beaches rises / Drop in some single-use plastic items – Beachwatch survey
07.08.2024
SINGLE-USE PLASTICS
UK government polls companies, supply chain for views on SUP regulations
06.08.2024
Seite 2 von 48
Topic search
Plastics Information Europe
  • Polymer Prices (5.826)
    • Petrochemicals (422)
    • Standard Thermoplastics (919)
    • PET (241)
    • Engineering Thermoplastics (246)
    • Recyclate (351)
      • Standard Thermoplastics / Recyclate (175)
      • Engineering Thermoplastics / Recyclate (176)
    • Polyurethanes (238)
    • High Performance Polymers (2)
    • Composites (174)
    • Announcements (2.554)
    • World Regions (559)
      • China (276)
        • Standard Thermoplastics (139)
        • Engineering Thermoplastics (137)
      • North America (159)
      • Russia (124)
    • Spot Prices (117)
    • Forecasts (3)
  • Companies (33.094)
    • Polymer Materials (16.397)
      • Petrochemicals (2.947)
      • Charge (1.793)
        • General (89)
        • Masterbatches (332)
        • Additives (747)
        • Colours (366)
        • Reinforcements/Fillers (259)
      • Polymers (10.530)
        • General (672)
        • Standard Thermoplastics (3.650)
          • General (113)
          • Polyolefins (1.848)
          • Polystyrenes (322)
          • PVC (639)
          • Polyester (542)
          • Expandable (PS, PP, PE) (186)
        • Technical Thermoplastics (3.111)
          • General (348)
          • Styrene Copolymers (249)
          • PC/PMMA (438)
          • Polyamides (857)
          • POM/PBT/PP (302)
          • Technical Compounds (917)
        • PUR (758)
        • Other (2.339)
          • General (100)
          • Composites/Thermosets (396)
          • High Performance (582)
          • Biopolymers (678)
          • Elastomers/TPE (356)
          • Recyclate (227)
      • Distribution (1.127)
    • Machinery (1.061)
      • General (27)
      • Plant Construction (129)
      • Core Machines (728)
        • General (88)
        • Extrusion (175)
        • Injection Moulding (362)
        • Blow Moulding (71)
        • Foam (12)
        • PUR (16)
        • Compression Moulding (4)
      • Peripherals (173)
        • General (31)
        • Control Systems (4)
        • Automatisation (33)
        • Dies/Tools/Moulds (92)
        • Components (13)
      • Finishing (4)
    • Processing (6.835)
      • General (852)
      • Extrusion (2.257)
        • General (112)
        • Flexible Films (1.088)
        • Rigid Films/Sheet (365)
        • Pipes (340)
        • Profiles/Rods (255)
        • Other (97)
      • Injection Moulding (1.636)
      • Blow Moulding (490)
      • PUR (284)
      • Other (1.083)
        • General (114)
        • Foam (302)
        • Composites/Thermosets (334)
        • Thermoforming (208)
        • Rotational Moulding (31)
        • Additive Manufacturing (94)
      • Finishing (233)
    • Application (7.003)
      • General (125)
      • Packaging (3.024)
      • Construction (695)
      • Automotive / Transport (1.603)
      • Electrical Appliances (326)
      • Consumer Goods (652)
      • Medical (376)
      • Technical (202)
    • Other (1.798)
      • Recycling/Disposal (1.453)
      • Services (248)
      • Logistics (97)
  • Commercial Register (109)
    • Insolvency (104)
    • Changes (5)
  • Markets (22.142)
    • Polymer Materials (9.598)
      • Petrochemicals (2.333)
      • Charge (831)
        • General (38)
        • Masterbatches (90)
        • Additives (330)
        • Colours (153)
        • Reinforcements/Fillers (220)
      • Polymers (6.072)
        • General (713)
        • Standard Thermoplastics (2.335)
          • General (74)
          • Polyolefins (1.154)
          • Polystyrenes (154)
          • PVC (483)
          • Polyester (335)
          • Expandable (PS, PP, PE) (135)
        • Technical Thermoplastics (1.231)
          • General (87)
          • Styrene Copolymers (101)
          • PC/PMMA (144)
          • Polyamides (420)
          • POM/PBT/PP (106)
          • Technical Compounds (373)
        • PUR (441)
        • Other (1.352)
          • General (46)
          • Composites/Thermosets (287)
          • High Performance (293)
          • Biopolymers (416)
          • Elastomers/TPE (137)
          • Recyclate (173)
      • Other Materials (57)
      • Distribution (305)
    • Machinery (500)
      • General (127)
      • Plant Construction (14)
      • Core Machines (288)
        • General (109)
        • Extrusion (36)
        • Injection Moulding (122)
        • Blow Moulding (14)
        • PUR (5)
        • Compression Moulding (2)
      • Peripherals (71)
        • General (21)
        • Automatisation (16)
        • Dies/Tools/Moulds (34)
    • Processing (1.638)
      • General (403)
      • Extrusion (596)
        • General (20)
        • Flexible Films (290)
        • Rigid Films/Sheets (116)
        • Pipes (70)
        • Profiles/Rods (89)
        • Other (11)
      • Injection Moulding (176)
      • Blow Moulding (43)
      • PUR (77)
      • Other (299)
        • General (20)
        • Foam (77)
        • Composites/Thermosets (136)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (38)
      • Finishing (44)
    • Applications (3.879)
      • General (36)
      • Packaging (1.867)
      • Construction (296)
      • Automotive / Transport (927)
      • Electrical Appliances (212)
      • Consumer Goods (242)
      • Medical (197)
      • Technical (56)
      • Other (46)
    • Regions and Countries (4.013)
      • World (194)
      • German-speaking Countries (471)
      • Europe (1.942)
        • General (463)
        • Italy (142)
        • France (154)
        • Spain/Portugal (97)
        • Great Britain/Ireland (502)
        • Low Countries (74)
        • Central Europe (173)
        • Scandinavia (44)
        • Russia (107)
        • Eastern Europe (46)
        • Southeastern Europe (140)
      • North America (480)
      • Asia (667)
        • General (118)
        • China (389)
        • Japan (49)
        • Korea (26)
        • India (85)
      • Middle East (141)
      • Other (37)
      • South America (81)
    • Other (2.514)
      • Recycling/Disposal (1.884)
      • Economic Trend (337)
      • Services (41)
      • Logistics (198)
      • Energy (54)
  • Production and Engineering (3.679)
    • Polymer Materials (2.299)
      • Petrochemicals (55)
      • Charge (434)
        • General (13)
        • Masterbatches (111)
        • Additives (222)
        • Colours (53)
        • Reinforcements/Fillers (35)
      • Polymers (1.780)
        • General (29)
        • Standard Themoplastics (356)
        • Technical Thermoplastics (590)
          • General (19)
          • Styrene Copolymers (61)
          • PC/PMMA (62)
          • Polyamides (202)
          • POM/PBT/PP (66)
          • Technical Compounds (180)
        • PUR (69)
        • Other (736)
          • General (21)
          • Composites/Thermosets (106)
          • High Performance (159)
          • Biopolymers (235)
          • Elastomers/TPE (113)
          • Recyclate (102)
      • Other (30)
    • Machinery (94)
      • Extrusion (20)
        • General (8)
        • Flexible Films (5)
        • Calender (3)
        • Rigid films/Sheets/Thermoforming (1)
        • Pipes/Profiles (3)
      • Injection Moulding (31)
        • General (15)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (33)
    • Research (420)
      • Polymer Materials (140)
      • Technical (13)
      • Product Development (40)
      • Process (81)
      • Application (89)
      • Patents (4)
        • Polymer Materials (2)
        • Process (2)
      • Other (53)
    • New Products (828)
      • Packaging (544)
      • Construction (34)
      • Automotive / Transport (97)
      • Electrical Appliances (26)
      • Consumer Goods (48)
      • Medical (36)
      • Technical (7)
      • Other (36)
    • Other (38)
  • Management (627)
    • Purchasing (99)
    • General Management (133)
    • Company organisation (43)
    • Marketing/Sales (14)
    • Human Resources (7)
    • Finances (88)
    • Logistics (243)
  • People (1.472)
  • Industry (5.688)
    • General (1.131)
    • Associations/Institutions (2.192)
    • Legislation (1.194)
    • Environment / Health (1.161)
    • plas.TV - Plastics unite(d) (10)
  • Events (1.119)
  • Plastic Fantastic (518)
  • Commentaries (77)
  • Interviews (130)
  • Notes by Publisher (69)
© 2024 by Plastics Information Europe, Bad Homburg
Date of print: 05/11/2024
Ref: fzyped55voqiuc4541ajz045
KIVBHI
All rights reserved.
Access and use is subject to our terms and conditions.
URL: https://pieweb.plasteurope.com/Default.aspx?pageid=302&referrer=mehraus_227738&node=100360&page=2