www.pieweb.com

Polymer Prices Recyclate Engineering Thermoplastics / Recyclate

POLYMER PRICES
Engineering recyclate April 2012: Rising trend as Q2 starts / Primary polymer increases roll on /Tight supply of input material drives secondary costs upward / Triple-digit increases could be in store for May
20.04.2012
POLYMER PRICES
Engineering recyclate March 2012: Secondary ABS continues to rise / Upward tendencies for rPA and rPC / rPOM and rPP compounds stay put / Production scrap increasingly tight and expensive / Price rises imminent
19.03.2012
POLYMER PRICES
Engineering recyclate February 2012: Anticipated primary market increases coupled with product shortages drive ABS and PA 6 recyclate up / Rollover dominates elsewhere / Supply and demand stable at a high level / Feedstocks continue to rise
20.02.2012
POLYMER PRICES
Engineering recyclate January 2012: Prices roll over across the board / Stock replenishing measures drive demand / Automotive sector gets off to a strong start / Recyclers plan significant hikes
19.01.2012
POLYMER PRICES
Engineering Recyclate December 2011: Stability prevails / rPOM follows primary material down slightly / rPP producers pass on cost reductions / Automotive suppliers begin end-of-year rallye / Rollover likely
19.12.2011
POLYMER PRICES
Engineering Recyclate November 2011: Pressure from crumbling primary market impacts secondary sector / Prices for rABS, rPC and rPP-Copo compounds slip / Margins suffer as plastic scrap prices remain high / Recyclers will take a tough line on a rollover
21.11.2011
POLYMER PRICES
Engineering Recyclate October 2011: End to the primary market's Q3 price cap causes recyclate notations to crumble / Double-digit falls abound / rPP compounds stable / Availability of plastic scrap improves / Declining orders / Stability possible
20.10.2011
POLYMER PRICES
Engineering Recyclate September 2011: Virgin material's instability hits rPA, rPOM and rPC / Plastic scrap still tight and expensive / Demand for inexpensive recyclate remains strong / Suppliers intend to take hard line
20.09.2011
POLYMER PRICES
Engineering Recyclate August 2011: Notations remain stable to firm / rPA and rPC/ABS blends still tight / Demand appears to be holding up well / rPP compounds may come under some degree of pressure
22.08.2011
POLYMER PRICES
Engineering Recyclate July 2011: Secondary market remains resistant despite pressure from virgin material / rPA 6.6 and rPC see reductions / Higher primary cost also impacts production scrap / Situation likely to stabilise despite slack ordering
20.07.2011
POLYMER PRICES
Engineering Recyclate June 2011: Stability pervades / Price rises for rPA 6 and rPC blends / Ultra-low rPOM prices brought into line / Production scrap remains short / Margins threatened by price hikes in primary sector
20.06.2011
POLYMER PRICES
Engineering Recyclate May 2011: Range narrows with rPA, rPC and rPP / Availability of production scrap improves slightly / Demand still lively / No consensus on price hikes
20.05.2011
POLYMER PRICES
Engineering Recyclate April 2011: Producers initially reluctant to pass on higher costs / Corrections only at the upper end of the scale / Shortage of plastic scrap / Supply of recyclate inadequate / Price increases planned after Easter
20.04.2011
POLYMER PRICES
Engineering Recyclate March 2011: More price increases ahead as cost wave has secondary market in its grip / Virgin material tighter and more expensive / Booming demand / Strong risk of hikes remains
21.03.2011
POLYMER PRICES
Engineering recyclate February 2011: rABS and rPA hit by primary polymer price surge / Explosion at top end of rPOM / Scrap ever tighter / Switch from virgin to recyclate / Suppliers seek hikes of 5-6% in March
16.02.2011
POLYMER PRICES
Engineering recyclate January 2011: Momentum from primary market drives range upward / rABS and rPOM tight / Fresh FM limits rPA / Pipeline refilling and price surge for virgin polymer fuel demand
19.01.2011
POLYMER PRICES
Engineering recyclate December 2010: Hikes on primary market leave regrind cold / Market battles pressure rPOM / Additives drive up rPC GF / Demand surprisingly strong / Shortages could fuel upswing
17.12.2010
POLYMER PRICES
Engineering recyclate November 2010: Mostly stable / Price rises only at the upper end of the rABS and rPA 6 range / Supply of primary material improves / Demand continues lively / Risk of increase remains
18.11.2010
POLYMER PRICES
Engineering recyclate October 2010: Dregs at the bottom of the market stirred up / Long-term low-priced contracts jacked up steeply / Material in the PIE range stable / Lively demand / K 2010 to point the way
20.10.2010
POLYMER PRICES
Recyclate September 2010: Diverging movements in standard segment / Adequate supply meets normal demand / Trend in primary sector caps polyolefins / For engineering grades, the calm before the storm
20.09.2010
POLYMER PRICES
Recyclate August 2010: Standard grades firm despite crumbling primary notations / Shortage of material drives rPA and rPC up steeply
19.08.2010
POLYMER PRICES
Recyclate July 2010: Some standard grades point sharply upward / Low end of engineering plastics range lifted
20.07.2010
POLYMER PRICES
Standard thermoplastic recyclate remains stable in June / Some prices decrease / Secondary engineering polymers still caught in upward spiral / Polyamide leads the price upswing
21.06.2010
POLYMER PRICES
Recyclate prices continue their upward climb in May / Hikes for almost all products as market remains tight
21.05.2010
POLYMER PRICES
Tightness of primary market spills over into secondary sector / Regrind prices rise for both standard and engineering grades / No relief likely in the short term
23.04.2010
Seite 6 von 6
Topic search
Plastics Information Europe
  • Polymer Prices (4.456)
    • Petrochemicals (219)
    • Standard Thermoplastics (644)
    • PET (188)
    • Engineering Thermoplastics (192)
    • Recyclate (247)
      • Standard Thermoplastics / Recyclate (123)
      • Engineering Thermoplastics / Recyclate (124)
    • Polyurethanes (186)
    • High Performance Polymers (2)
    • Composites (122)
    • Announcements (2.212)
    • World Regions (381)
      • China (172)
        • Standard Thermoplastics (87)
        • Engineering Thermoplastics (85)
      • North America (107)
      • Russia (102)
    • Spot Prices (63)
  • Companies (24.084)
    • Polymer Materials (11.832)
      • Petrochemicals (2.084)
      • Charge (1.437)
        • General (65)
        • Masterbatches (278)
        • Additives (584)
        • Colours (283)
        • Reinforcements/Fillers (227)
      • Polymers (7.421)
        • General (410)
        • Standard Thermoplastics (2.657)
          • General (89)
          • Polyolefins (1.305)
          • Polystyrenes (221)
          • PVC (497)
          • Polyester (397)
          • Expandable (PS, PP, PE) (148)
        • Technical Thermoplastics (2.205)
          • General (294)
          • Styrene Copolymers (168)
          • PC/PMMA (286)
          • Polyamides (575)
          • POM/PBT/PP (198)
          • Technical Compounds (684)
        • PUR (537)
        • Other (1.612)
          • General (78)
          • Composites/Thermosets (327)
          • High Performance (416)
          • Biopolymers (486)
          • Elastomers/TPE (254)
          • Recyclate (51)
      • Distribution (890)
    • Machinery (951)
      • General (20)
      • Plant Construction (106)
      • Core Machines (661)
        • General (75)
        • Extrusion (159)
        • Injection Moulding (332)
        • Blow Moulding (65)
        • Foam (10)
        • PUR (16)
        • Compression Moulding (4)
      • Peripherals (160)
        • General (28)
        • Control Systems (4)
        • Automatisation (29)
        • Dies/Tools/Moulds (86)
        • Components (13)
      • Finishing (4)
    • Processing (5.445)
      • General (679)
      • Extrusion (1.784)
        • General (83)
        • Flexible Films (836)
        • Rigid Films/Sheet (300)
        • Pipes (279)
        • Profiles/Rods (213)
        • Other (73)
      • Injection Moulding (1.307)
      • Blow Moulding (388)
      • PUR (213)
      • Other (881)
        • General (96)
        • Foam (235)
        • Composites/Thermosets (295)
        • Thermoforming (163)
        • Rotational Moulding (26)
        • Additive Manufacturing (66)
      • Finishing (193)
    • Application (5.106)
      • General (90)
      • Packaging (2.105)
      • Construction (527)
      • Automotive / Transport (1.259)
      • Electrical Appliances (261)
      • Consumer Goods (421)
      • Medical (298)
      • Technical (145)
    • Other (750)
      • Recycling/Disposal (590)
      • Services (160)
  • Commercial Register (72)
    • Insolvency (67)
    • Changes (5)
  • Markets (15.341)
    • Polymer Materials (6.608)
      • Petrochemicals (1.556)
      • Charge (667)
        • General (32)
        • Masterbatches (78)
        • Additives (252)
        • Colours (113)
        • Reinforcements/Fillers (192)
      • Polymers (4.181)
        • General (331)
        • Standard Thermoplastics (1.758)
          • General (47)
          • Polyolefins (864)
          • Polystyrenes (109)
          • PVC (370)
          • Polyester (255)
          • Expandable (PS, PP, PE) (113)
        • Technical Thermoplastics (855)
          • General (75)
          • Styrene Copolymers (58)
          • PC/PMMA (109)
          • Polyamides (290)
          • POM/PBT/PP (67)
          • Technical Compounds (256)
        • PUR (318)
        • Other (919)
          • General (31)
          • Composites/Thermosets (235)
          • High Performance (228)
          • Biopolymers (298)
          • Elastomers/TPE (100)
          • Recyclate (27)
      • Other Materials (12)
      • Distribution (192)
    • Machinery (439)
      • General (110)
      • Plant Construction (12)
      • Core Machines (249)
        • General (88)
        • Extrusion (32)
        • Injection Moulding (108)
        • Blow Moulding (14)
        • PUR (5)
        • Compression Moulding (2)
      • Peripherals (68)
        • General (21)
        • Automatisation (14)
        • Dies/Tools/Moulds (33)
    • Processing (1.362)
      • General (294)
      • Extrusion (501)
        • General (18)
        • Flexible Films (235)
        • Rigid Films/Sheets (98)
        • Pipes (66)
        • Profiles/Rods (77)
        • Other (7)
      • Injection Moulding (172)
      • Blow Moulding (39)
      • PUR (60)
      • Other (254)
        • General (19)
        • Foam (56)
        • Composites/Thermosets (129)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (22)
      • Finishing (42)
    • Applications (2.546)
      • General (21)
      • Packaging (1.079)
      • Construction (224)
      • Automotive / Transport (702)
      • Electrical Appliances (172)
      • Consumer Goods (136)
      • Medical (143)
      • Technical (41)
      • Other (28)
    • Regions and Countries (3.513)
      • World (170)
      • German-speaking Countries (392)
      • Europe (1.707)
        • General (383)
        • Italy (129)
        • France (151)
        • Spain/Portugal (77)
        • Great Britain/Ireland (456)
        • Low Countries (73)
        • Central Europe (167)
        • Scandinavia (41)
        • Russia (83)
        • Eastern Europe (38)
        • Southeastern Europe (109)
      • North America (403)
      • Asia (596)
        • General (104)
        • China (345)
        • Japan (47)
        • Korea (24)
        • India (76)
      • Middle East (135)
      • Other (34)
      • South America (76)
    • Other (873)
      • Recycling/Disposal (778)
      • Economic Trend (60)
      • Services (29)
      • Logistics (6)
  • Production and Engineering (2.576)
    • Polymer Materials (1.667)
      • Petrochemicals (27)
      • Charge (338)
        • General (12)
        • Masterbatches (77)
        • Additives (175)
        • Colours (39)
        • Reinforcements/Fillers (35)
      • Polymers (1.277)
        • General (15)
        • Standard Themoplastics (247)
        • Technical Thermoplastics (478)
          • General (17)
          • Styrene Copolymers (45)
          • PC/PMMA (48)
          • Polyamides (162)
          • POM/PBT/PP (52)
          • Technical Compounds (154)
        • PUR (54)
        • Other (483)
          • General (17)
          • Composites/Thermosets (93)
          • High Performance (123)
          • Biopolymers (157)
          • Elastomers/TPE (89)
          • Recyclate (4)
      • Other (25)
    • Machinery (86)
      • Extrusion (19)
        • General (8)
        • Flexible Films (4)
        • Calender (3)
        • Rigid films/Sheets/Thermoforming (1)
        • Pipes/Profiles (3)
      • Injection Moulding (31)
        • General (15)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (26)
    • Research (251)
      • Polymer Materials (89)
      • Technical (10)
      • Product Development (27)
      • Process (57)
      • Application (49)
      • Patents (2)
        • Polymer Materials (1)
        • Process (1)
      • Other (17)
    • New Products (547)
      • Packaging (340)
      • Construction (26)
      • Automotive / Transport (71)
      • Electrical Appliances (21)
      • Consumer Goods (31)
      • Medical (27)
      • Technical (7)
      • Other (24)
    • Other (25)
  • Management (166)
    • Purchasing (25)
    • General Management (50)
    • Company organisation (37)
    • Marketing/Sales (8)
    • Human Resources (3)
    • Finances (36)
    • Logistics (7)
  • People (1.257)
  • Industry (2.974)
    • General (677)
    • Associations/Institutions (1.264)
    • Legislation (653)
    • Environment / Health (370)
    • plas.TV - Plastics unite(d) (10)
  • Events (981)
  • Plastic Fantastic (356)
  • Commentaries (52)
  • Interviews (61)
  • Notes by Publisher (28)
© 2022 by Plastics Information Europe, Bad Homburg
Date of print: 19/08/2022
Ref: x3nalkbgfhpbfgjvgrf5rhug
KIVBHI
All rights reserved.
Access and use is subject to our terms of use.
URL: https://pieweb.plasteurope.com/Default.aspx?pageid=302&referrer=mehraus_227301&node=100074&page=6