www.pieweb.com
Strengthen your position in business negotiations!
  • European market reports for standard and engineering,
    thermoplastics, polyurethanes, recyclate, composites/GRP,
    feedstocks – more than 100 grades of polymer covered.
  • MyPrices – individually configured reports and e-mail alerts
  • Comparative and analytical tools

Polymer Prices Recyclate Engineering Thermoplastics / Recyclate

POLYMER PRICES
Engineering recyclate February 2012: Anticipated primary market increases coupled with product shortages drive ABS and PA 6 recyclate up / Rollover dominates elsewhere / Supply and demand stable at a high level / Feedstocks continue to rise
20.02.2012
POLYMER PRICES
Engineering recyclate January 2012: Prices roll over across the board / Stock replenishing measures drive demand / Automotive sector gets off to a strong start / Recyclers plan significant hikes
19.01.2012
POLYMER PRICES
Engineering Recyclate December 2011: Stability prevails / rPOM follows primary material down slightly / rPP producers pass on cost reductions / Automotive suppliers begin end-of-year rallye / Rollover likely
19.12.2011
POLYMER PRICES
Engineering Recyclate November 2011: Pressure from crumbling primary market impacts secondary sector / Prices for rABS, rPC and rPP-Copo compounds slip / Margins suffer as plastic scrap prices remain high / Recyclers will take a tough line on a rollover
21.11.2011
POLYMER PRICES
Engineering Recyclate October 2011: End to the primary market's Q3 price cap causes recyclate notations to crumble / Double-digit falls abound / rPP compounds stable / Availability of plastic scrap improves / Declining orders / Stability possible
20.10.2011
POLYMER PRICES
Engineering Recyclate September 2011: Virgin material's instability hits rPA, rPOM and rPC / Plastic scrap still tight and expensive / Demand for inexpensive recyclate remains strong / Suppliers intend to take hard line
20.09.2011
POLYMER PRICES
Engineering Recyclate August 2011: Notations remain stable to firm / rPA and rPC/ABS blends still tight / Demand appears to be holding up well / rPP compounds may come under some degree of pressure
22.08.2011
POLYMER PRICES
Engineering Recyclate July 2011: Secondary market remains resistant despite pressure from virgin material / rPA 6.6 and rPC see reductions / Higher primary cost also impacts production scrap / Situation likely to stabilise despite slack ordering
20.07.2011
POLYMER PRICES
Engineering Recyclate June 2011: Stability pervades / Price rises for rPA 6 and rPC blends / Ultra-low rPOM prices brought into line / Production scrap remains short / Margins threatened by price hikes in primary sector
20.06.2011
POLYMER PRICES
Engineering Recyclate May 2011: Range narrows with rPA, rPC and rPP / Availability of production scrap improves slightly / Demand still lively / No consensus on price hikes
20.05.2011
POLYMER PRICES
Engineering Recyclate April 2011: Producers initially reluctant to pass on higher costs / Corrections only at the upper end of the scale / Shortage of plastic scrap / Supply of recyclate inadequate / Price increases planned after Easter
20.04.2011
POLYMER PRICES
Engineering Recyclate March 2011: More price increases ahead as cost wave has secondary market in its grip / Virgin material tighter and more expensive / Booming demand / Strong risk of hikes remains
21.03.2011
POLYMER PRICES
Engineering recyclate February 2011: rABS and rPA hit by primary polymer price surge / Explosion at top end of rPOM / Scrap ever tighter / Switch from virgin to recyclate / Suppliers seek hikes of 5-6% in March
16.02.2011
POLYMER PRICES
Engineering recyclate January 2011: Momentum from primary market drives range upward / rABS and rPOM tight / Fresh FM limits rPA / Pipeline refilling and price surge for virgin polymer fuel demand
19.01.2011
POLYMER PRICES
Engineering recyclate December 2010: Hikes on primary market leave regrind cold / Market battles pressure rPOM / Additives drive up rPC GF / Demand surprisingly strong / Shortages could fuel upswing
17.12.2010
POLYMER PRICES
Engineering recyclate November 2010: Mostly stable / Price rises only at the upper end of the rABS and rPA 6 range / Supply of primary material improves / Demand continues lively / Risk of increase remains
18.11.2010
POLYMER PRICES
Engineering recyclate October 2010: Dregs at the bottom of the market stirred up / Long-term low-priced contracts jacked up steeply / Material in the PIE range stable / Lively demand / K 2010 to point the way
20.10.2010
POLYMER PRICES
Recyclate September 2010: Diverging movements in standard segment / Adequate supply meets normal demand / Trend in primary sector caps polyolefins / For engineering grades, the calm before the storm
20.09.2010
POLYMER PRICES
Recyclate August 2010: Standard grades firm despite crumbling primary notations / Shortage of material drives rPA and rPC up steeply
19.08.2010
POLYMER PRICES
Recyclate July 2010: Some standard grades point sharply upward / Low end of engineering plastics range lifted
20.07.2010
POLYMER PRICES
Standard thermoplastic recyclate remains stable in June / Some prices decrease / Secondary engineering polymers still caught in upward spiral / Polyamide leads the price upswing
21.06.2010
POLYMER PRICES
Recyclate prices continue their upward climb in May / Hikes for almost all products as market remains tight
21.05.2010
POLYMER PRICES
Tightness of primary market spills over into secondary sector / Regrind prices rise for both standard and engineering grades / No relief likely in the short term
23.04.2010
Seite 5 von 5
Topic search
Plastics Information Europe
  • Polymer Prices (4.432)
    • Petrochemicals (217)
    • Standard Thermoplastics (638)
    • PET (186)
    • Engineering Thermoplastics (191)
    • Recyclate (245)
      • Standard Thermoplastics / Recyclate (122)
      • Engineering Thermoplastics / Recyclate (123)
    • Polyurethanes (185)
    • High Performance Polymers (2)
    • Composites (121)
    • Announcements (2.208)
    • World Regions (377)
      • China (170)
        • Standard Thermoplastics (86)
        • Engineering Thermoplastics (84)
      • North America (106)
      • Russia (101)
    • Spot Prices (62)
  • Companies (23.892)
    • Polymer Materials (11.744)
      • Petrochemicals (2.071)
      • Charge (1.426)
        • General (65)
        • Masterbatches (276)
        • Additives (578)
        • Colours (280)
        • Reinforcements/Fillers (227)
      • Polymers (7.360)
        • General (404)
        • Standard Thermoplastics (2.636)
          • General (89)
          • Polyolefins (1.294)
          • Polystyrenes (218)
          • PVC (494)
          • Polyester (394)
          • Expandable (PS, PP, PE) (147)
        • Technical Thermoplastics (2.187)
          • General (293)
          • Styrene Copolymers (167)
          • PC/PMMA (284)
          • Polyamides (570)
          • POM/PBT/PP (197)
          • Technical Compounds (676)
        • PUR (534)
        • Other (1.599)
          • General (78)
          • Composites/Thermosets (326)
          • High Performance (413)
          • Biopolymers (483)
          • Elastomers/TPE (251)
          • Rezyklate (48)
      • Distribution (887)
    • Machinery (948)
      • General (20)
      • Plant Construction (105)
      • Core Machines (660)
        • General (75)
        • Extrusion (159)
        • Injection Moulding (331)
        • Blow Moulding (65)
        • Foam (10)
        • PUR (16)
        • Compression Moulding (4)
      • Peripherals (159)
        • General (27)
        • Control Systems (4)
        • Automatisation (29)
        • Dies/Tools/Moulds (86)
        • Components (13)
      • Finishing (4)
    • Processing (5.403)
      • General (674)
      • Extrusion (1.772)
        • General (83)
        • Flexible Films (829)
        • Rigid Films/Sheet (298)
        • Pipes (277)
        • Profiles/Rods (213)
        • Other (72)
      • Injection Moulding (1.298)
      • Blow Moulding (385)
      • PUR (210)
      • Other (872)
        • General (95)
        • Foam (233)
        • Composites/Thermosets (293)
        • Thermoforming (163)
        • Rotational Moulding (26)
        • Additive Manufacturing (62)
      • Finishing (192)
    • Application (5.058)
      • General (89)
      • Packaging (2.088)
      • Construction (523)
      • Automotive / Transport (1.245)
      • Electrical Appliances (260)
      • Consumer Goods (417)
      • Medical (294)
      • Technical (142)
    • Other (739)
      • Recycling/Disposal (580)
      • Services (159)
  • Commercial Register (70)
    • Insolvency (65)
    • Changes (5)
  • Markets (15.228)
    • Polymer Materials (6.570)
      • Petrochemicals (1.551)
      • Charge (661)
        • General (32)
        • Masterbatches (77)
        • Additives (249)
        • Colours (111)
        • Reinforcements/Fillers (192)
      • Polymers (4.154)
        • General (329)
        • Standard Thermoplastics (1.749)
          • General (47)
          • Polyolefins (861)
          • Polystyrenes (108)
          • PVC (367)
          • Polyester (253)
          • Expandable (PS, PP, PE) (113)
        • Technical Thermoplastics (847)
          • General (74)
          • Styrene Copolymers (58)
          • PC/PMMA (107)
          • Polyamides (288)
          • POM/PBT/PP (67)
          • Technical Compounds (253)
        • PUR (316)
        • Other (913)
          • General (31)
          • Composites/Thermosets (233)
          • High Performance (227)
          • Biopolymers (296)
          • Elastomers/TPE (99)
          • Recyclate (27)
      • Other Materials (12)
      • Distribution (192)
    • Machinery (439)
      • General (110)
      • Plant Construction (12)
      • Core Machines (249)
        • General (88)
        • Extrusion (32)
        • Injection Moulding (108)
        • Blow Moulding (14)
        • PUR (5)
        • Compression Moulding (2)
      • Peripherals (68)
        • General (21)
        • Automatisation (14)
        • Dies/Tools/Moulds (33)
    • Processing (1.345)
      • General (289)
      • Extrusion (496)
        • General (18)
        • Flexible Films (234)
        • Rigid Films/Sheets (96)
        • Pipes (64)
        • Profiles/Rods (77)
        • Other (7)
      • Injection Moulding (171)
      • Blow Moulding (37)
      • PUR (60)
      • Other (250)
        • General (18)
        • Foam (55)
        • Composites/Thermosets (129)
        • Thermoforming (20)
        • Rotational Moulding (8)
        • Additive Manufacturing (20)
      • Finishing (42)
    • Applications (2.510)
      • General (20)
      • Packaging (1.065)
      • Construction (219)
      • Automotive / Transport (695)
      • Electrical Appliances (172)
      • Consumer Goods (135)
      • Medical (139)
      • Technical (40)
      • Other (25)
    • Regions and Countries (3.507)
      • World (170)
      • German-speaking Countries (392)
      • Europe (1.703)
        • General (383)
        • Italy (129)
        • France (151)
        • Spain/Portugal (76)
        • Great Britain/Ireland (455)
        • Low Countries (73)
        • Central Europe (166)
        • Scandinavia (41)
        • Russia (83)
        • Eastern Europe (37)
        • Southeastern Europe (109)
      • North America (403)
      • Asia (594)
        • General (104)
        • China (343)
        • Japan (47)
        • Korea (24)
        • India (76)
      • Middle East (135)
      • Other (34)
      • South America (76)
    • Other (857)
      • Recycling/Disposal (766)
      • Economic Trend (58)
      • Services (29)
      • Logistics (4)
  • Production and Engineering (2.558)
    • Polymer Materials (1.654)
      • Petrochemicals (26)
      • Charge (338)
        • General (12)
        • Masterbatches (77)
        • Additives (175)
        • Colours (39)
        • Reinforcements/Fillers (35)
      • Polymers (1.265)
        • General (15)
        • Standard Themoplastics (245)
        • Technical Thermoplastics (474)
          • General (17)
          • Styrene Copolymers (45)
          • PC/PMMA (48)
          • Polyamides (161)
          • POM/PBT/PP (52)
          • Technical Compounds (151)
        • PUR (54)
        • Other (477)
          • General (17)
          • Composites/Thermosets (93)
          • High Performance (122)
          • Biopolymers (154)
          • Elastomers/TPE (88)
          • Recyclate (3)
      • Other (25)
    • Machinery (86)
      • Extrusion (19)
        • General (8)
        • Flexible Films (4)
        • Calender (3)
        • Rigid films/Sheets/Thermoforming (1)
        • Pipes/Profiles (3)
      • Injection Moulding (31)
        • General (15)
        • Process (10)
        • Tools (4)
        • Automatisation (2)
      • Blow Moulding (10)
      • Other (26)
    • Research (250)
      • Polymer Materials (89)
      • Technical (10)
      • Product Development (27)
      • Process (57)
      • Application (49)
      • Patents (2)
        • Polymer Materials (1)
        • Process (1)
      • Other (16)
    • New Products (543)
      • Packaging (337)
      • Construction (26)
      • Automotive / Transport (71)
      • Electrical Appliances (21)
      • Consumer Goods (31)
      • Medical (27)
      • Technical (7)
      • Other (23)
    • Other (25)
  • Management (161)
    • Purchasing (23)
    • General Management (49)
    • Company organisation (37)
    • Marketing/Sales (8)
    • Human Resources (3)
    • Finances (35)
    • Logistics (6)
  • People (1.244)
  • Industry (2.934)
    • General (674)
    • Associations/Institutions (1.242)
    • Legislation (645)
    • Environment / Health (363)
    • plas.TV - Plastics unite(d) (10)
  • Events (972)
  • Plastic Fantastic (354)
  • Commentaries (51)
  • Interviews (61)
  • Notes by Publisher (28)
© 2020 by Plastics Information Europe, Bad Homburg
Date of print: 29/05/2020
Ref: i5bcki55nt0upwqearx0yl2d
KIVBHI
All rights reserved.
Access und use is subject to our terms of use.
URL: https://pieweb.plasteurope.com/Default.aspx?pageid=302&referrer=article&node=100074&page=5