www.pieweb.com
Search by category
Plastics Information Europe
Polymer Prices ...
Petrochemicals (127)
Standard Thermoplastics (219)
PET (102)
Engineering Thermoplastics (104)
Recyclate (69)
Polyurethanes (100)
High Performance Polymers (2)
Composites (37)
POLYMER PRICES
Composites/GRP April 2013: Ortho resins give way on upstream declines / Battles for market share continue / More downward momentum in May / Standard chopped strand mats lose strength (07.05.2013)
POLYMER PRICES
Composites/GRP March 2013: Market moves into higher gear / Glass fibre and standard chopped strand mats show surprising momentum / More of producers' targeted price hikes likely to go through (05.04.2013)
POLYMER PRICES
Composites/GRP February 2013: Uneven movement for medium-reactive ortho resins / Slightly higher prices / Long supply / Demand slacker than expected / Glass fibre products stable (06.03.2013)
POLYMER PRICES
Composites/GRP January 2013: Resins see slight gains / Producers seek across-the-board hikes / Demand boosted by inventory refilling / Direct roving loses more momentum (06.02.2013)
POLYMER PRICES
Composites/GRP December 2012: Resins prices unchanged / Direct roving slightly cheaper / End-of-year demand slack as forecast / Hike for matrix materials expected in North America / No movement in Europe (07.01.2013)
POLYMER PRICES
Composites/GRP November 2012: Medium reactive ortho resins and glass fibre products unchanged / Supply and demand in balance with slight tendency toward surplus / Just a single call for hikes in January (06.12.2012)
POLYMER PRICES
Composites/GRP October 2012: Last rock-bottom ortho resins prices banished / Demand trends farther downward / Glass fibre mostly unchanged / New capacities in Europe (06.11.2012)
POLYMER PRICES
Composites/GRP September 2012: Ortho resins prices bounce back to last year's level / Trend still pointing upward / Glass fibre notations move at the fringes / OEM supply shows skid marks (05.10.2012)
POLYMER PRICES
Composites/GRP August 2012: Ortho resins mostly unchanged / Only slight contractions at the lower end / Glass fibre products stable / Demand gathers strength after summer lull (06.09.2012)
POLYMER PRICES
Composites/GRP July 2012: Ortho resins prices point slightly downward / Glass fibre stable despite higher transportation costs / Demand seasonally weak / Stability expected in August (06.08.2012)
POLYMER PRICES
Composites/GRP June 2012: Ortho resins in weak rollover / Feedstock costs down / Converters expect rebates in July / Glass fibre notations defy producers‘ attempts to push through increases (05.07.2012)
POLYMER PRICES
Composites/GRP May 2012: Ortho resins prices fairly stable / Bottom end of the range moves slightly upward / Glass fibre notations barely changed / First announcements of price increases from mid-year (06.06.2012)
POLYMER PRICES
Composites/GRP April 2012: Ortho resins and glass fibre stagnate / Demand remains stable at a high level / Glass fibre supply long / Little market movement expected before summer (07.05.2012)
POLYMER PRICES
Composites/GRP March 2012: Ortho resins make further slight gains / Demand more robust on the whole / Supply adequate/ Consolidation in epoxy segment / Glass fibre downswing has bottomed out (05.04.2012)
POLYMER PRICES
Composites/GRP February 2012: Ortho resins again make slight gains / Momentum looks likely to hold up through H1 / Direct roving under considerable pressure / Demand stable for most products (06.03.2012)
POLYMER PRICES
Composites/GRP January 2012: Ortho resins prices remain stable / Glass fibre products still point downward / Slack demand in line with the season / Converters will try to push prices down farther in February (06.02.2012)
POLYMER PRICES
Composites/GRP December 2011: Resins lose a little more ground as the year ends / Upswing in petrochemical notations could reverse the trend / Roving and glass fibre come under pressure (05.01.2012)
POLYMER PRICES
Composites/GRP November 2011: Downward momentum continues for resins / Most corrections take place at upper end / Demand begins to soften / European market is expected to see little movement in December (06.12.2011)
POLYMER PRICES
Composites/GRP October 2011: Downward trend in resins prices continues / Signs of slightly softening demand / Buyers of resins and glass fibre will be looking for additional rebates in November (04.11.2011)
POLYMER PRICES
Composites/GRP September 2011: Resin demand recovers only slightly after summer lull / Converters ordering cautiously / Sombre mood at “Composites Europe” fair / Glass fibre roving range widens minimally (07.10.2011)
POLYMER PRICES
Composites/GRP August 2011: Little activity in core holiday month / Demand for resin unlikely to pick up before mid-September / Stimulus expected from "Composites Europe" fair / Glass fibre tends slightly softer (06.09.2011)
POLYMER PRICES
Composites/GRP July 2011: Ortho resins producers pass through only half their cost advantage / Glass fibre stable despite imports / Summer demand slack / SM price explosion drives calls for hikes in Q3 (04.08.2011)
POLYMER PRICES
Composites/GRP June 2011: Notations for styrene and propylene lose more ground / Few repercussions for ortho resins / Glass fibre hikes fail to take hold / Market in off-season mode (06.07.2011)
POLYMER PRICES
Composites/GRP May 2011: Continued stability / Styrene monomer plunges / Mats and roving for glass fibre unchanged despite hike announcements / More of a buyer's market in June? (07.06.2011)
POLYMER PRICES
Composites/GRP April 2011: Slight increase in ortho resins notations lingers from March / Higher feedstocks could push composite products higher / Glass fibre stable across the board (05.05.2011)
POLYMER PRICES
Composites/GRP March 2011: Feedstocks drive ortho resins up strongly / Further smaller upward price momentum expected / Glass fibres stable / Renewed influx of material from China brings no price relief (06.04.2011)
POLYMER PRICES
Composites/GRP February 2011: Capacities well utilised / Ortho resins long / Further upward price momentum a certainty / Well-supplied glass fibre buyers hold back on ordering / Relaxation in March? (04.03.2011)
POLYMER PRICES
Composites/GRP January 2011: Steep hikes for ortho resins and glass fibre / Standard chopped strand mats the only exception / Demand curve pointing upward / February looks likely to be quieter (04.02.2011)
POLYMER PRICES
Composites/GRP December 2010: Market presents mixed picture at year-end / Ortho resins in strong rollover / EU duties drive chopped strand mats / Isolated hikes for direct rovings / Further increases in sight (06.01.2011)
POLYMER PRICES
Composites/GRP November 2010: Ortho resins and chopped strand mat markets quiet / Rovings move upward / Demand weakens as winter has Europe in its grip / Higher prices expected in the new year (06.12.2010)
POLYMER PRICES
Composites/GRP October 2010: Ortho resins stable to slightly weaker / Producers likely drawing up hike plans / Gains for standard chopped strand mats / Short glass fibres for compounds enjoy strong demand (04.11.2010)
POLYMER PRICES
Composites/GRP in September 2010: Little movement in resin feedstocks / Ortho resins prices mostly stable / Massive glass fibre price rises on the agenda for Q4 / Additional hikes likely in 2011 (06.10.2010)
POLYMER PRICES
Composites/GRP in August 2010: Ortho resins well supplied and stable / SM contracts point upward / Strong demand in all segments / Anti-dumping tariffs against Chinese imports tighten market (06.09.2010)
POLYMER PRICES
Composites/GRP in July 2010: Ortho resins begin Q3 on a stable note / Rovings see medium gains / Resins balanced, glass short / Summer lull dampens impetus for glass (05.08.2010)
POLYMER PRICES
Composites/GRP in June 2010: Rollover for ortho-resins / No major price increases or supply problems expected for standard grades / Glass fibre market faces tough Q3 with tight availability and risk of hike (06.07.2010)
POLYMER PRICES
Composites/GRP in May 2010: Increases for ortho-resins slow down / No apparent availability problems / No additional price hikes expected / Massive increases for some glass fibre products (07.06.2010)
POLYMER PRICES
Composites/GRP in April 2010: Triple-digit rise for ortho-resins caught in petrochemical upsurge / Chopped strand mats remain stable / Direct rovings rise / More price increases likely in May (06.05.2010)
Announcements (1482)
World Regions ...
China ...
Standard Thermoplastics (2)
Engineering Thermoplastics (3)
North America (21)
Russia (16)
Companies ...
Polymer Materials ...
Petrochemicals (868)
Charge ...
General (30)
Masterbatches (115)
Additives (244)
Colours (111)
Reinforcements/Fillers (99)
Polymers ...
General (203)
Standard Thermoplastics ...
General (48)
Polyolefins (596)
Polystyrenes (111)
PVC (281)
Polyester (213)
Expandable (PS, PP, PE) (91)
Technical Thermoplastics ...
General (181)
Styrene Copolymers (70)
PC/PMMA (139)
Polyamides (229)
POM/PBT/PP (78)
Technical Compounds (251)
PUR (255)
Other ...
General (43)
Composites/Thermosets (152)
High Performance (175)
Biopolymers (216)
Elastomers/TPE (95)
Distribution (345)
Machinery Manufacture ...
General (7)
Plant Construction (52)
Core Machines ...
General (38)
Extrusion (94)
Injection Moulding (202)
Blow Moulding (29)
Foam (7)
PUR (11)
Peripherals ...
General (16)
Control Systems (1)
Automatisation (6)
Dies/Tools/Moulds (51)
Components (4)
Finishing (2)
Processing ...
General (374)
Extrusion ...
General (44)
Flexible Films (353)
Rigid Films/Sheet (134)
Pipes (161)
Profiles/Rods (130)
Other (30)
Injection Moulding (598)
Blow Moulding (156)
PUR (96)
Other ...
General (31)
Foam (77)
Composites/Thermosets (125)
Thermoforming (50)
Rotational Moulding (13)
Finishing (80)
Application ...
General (30)
Packaging (857)
Construction (197)
Automotive (561)
Electrical Appliances (122)
Consumer Goods (153)
Medical (88)
Technical (33)
Other ...
Recycling/Disposal (163)
Services (93)
Commercial Register ...
Insolvency (47)
Changes (5)
Markets ...
Polymer Materials ...
Petrochemicals (690)
Charge ...
General (14)
Masterbatches (41)
Additives (127)
Colours (46)
Reinforcements/Fillers (96)
Polymers ...
General (143)
Standard Thermoplastics ...
General (23)
Polyolefins (417)
Polystyrenes (70)
PVC (215)
Polyester (139)
Expandable (PS, PP, PE) (77)
Technical Thermoplastics ...
General (51)
Styrene Copolymers (30)
PC/PMMA (69)
Polyamides (132)
POM/PBT/PP (42)
Technical Compounds (107)
PUR (171)
Other ...
General (20)
Composites/Thermosets (135)
High Performance (112)
Biopolymers (141)
Elastomers/TPE (54)
Other Materials (10)
Distribution (94)
Machinery ...
General (51)
Plant Construction (8)
Core Machines ...
General (47)
Extrusion (25)
Injection Moulding (64)
Blow Moulding (6)
PUR (3)
Peripherals ...
General (8)
Automatisation (5)
Dies/Tools/Moulds (23)
Processing ...
General (138)
Extrusion ...
General (9)
Flexible Films (139)
Rigid Films/Sheets (49)
Pipes (52)
Profiles/Rods (59)
Other (4)
Injection Moulding (140)
Blow Moulding (28)
PUR (32)
Other ...
General (7)
Foam (29)
Composites/Thermosets (69)
Thermoforming (9)
Rotational Moulding (8)
Finishing (22)
Applications ...
General (6)
Packaging (505)
Construction (108)
Automotive (314)
Electrical Appliances (102)
Consumer Goods (65)
Medical (41)
Technical (12)
Other (11)
Regions and Countries ...
World (162)
German-speaking Countries (315)
Europe ...
General (344)
Italy (99)
France (128)
Spain/Portugal (59)
Great Britain/Ireland (374)
Low Countries (71)
Central Europe (159)
Scandinavia (36)
Russia (79)
Eastern Europe (34)
Southeastern Europe (63)
North America (340)
Asia ...
General (94)
China (269)
Japan (44)
Korea (16)
India (63)
Middle East (120)
Other (24)
South America (61)
Other ...
Recycling/Disposal (242)
Economic Trend (22)
Services (10)
Production and Engineering ...
Polymer Materials ...
Petrochemicals (10)
Charge ...
General (6)
Masterbatches (29)
Additives (74)
Colours (14)
Reinforcements/Fillers (20)
Polymers ...
General (9)
Standard Themoplastics (118)
Technical Thermoplastics ...
General (9)
Styrene Copolymers (17)
PC/PMMA (27)
Polyamides (81)
POM/PBT/PP (29)
Technical Compounds (53)
PUR (26)
Other ...
General (7)
Composites/Thermosets (45)
High Performance (49)
Biopolymers (75)
Elastomers/TPE (44)
Other (10)
Machinery ...
Extrusion ...
General (6)
Flexible Films (3)
Calender (3)
Pipes/Profiles (3)
Injection Moulding ...
General (12)
Process/Proceeding ???? (9)
Tools ??? (3)
Automatisation (2)
Blow Moulding (8)
Other (15)
Research ...
Polymer Materials (37)
Technical (7)
Product Development (9)
Process (30)
Application (20)
Patents ...
Polymer Materials (1)
Other (6)
New Products ...
Packaging (128)
Construction (20)
Automotive (39)
Electrical Appliances (16)
Consumer Goods (10)
Medical (15)
Technical (4)
Other (11)
Other (15)
Management ...
Purchasing (20)
General Management (10)
Company Oganisation (4)
Marketing/Sales (7)
Finances (10)
People (657)
Industry ...
General (355)
Associations/Institutions (427)
Legislation (226)
Events (405)
Plastic Fantastic (92)
Commentaries/Notes by Publisher (17)
© 2013 by Plastics Information Europe, Bad Homburg
Date of print: 20/05/2013
Ref: d4tai3vv1g4vad45nf0i3p2r
KIVBHI
All rights reserved.
Access und use is subject to our terms of use.
URL: http://pieweb.plasteurope.com/Default.aspx?pageid=302&node=100511